Turret ring turning module not work

Talk about all other types of electronics here, such as batteries!
Post Reply
User avatar
leopardgreece
Corporal
Posts: 491
Joined: Tue Oct 27, 2015 1:48 pm

Turret ring turning module not work

Post by leopardgreece »

Hallo to everyone and Happy New Year .!!!!!I have a problem...!!!!!! I connected the turret ring and the metal turning gear module as photo.In the beginning for a while works but after some seconds stops. I checked with polimeter and WITHOUT moving the stick on the radio control left or right, ...it continiously.... shows -10 Volt (continiously) both sides. What i must do ...?????????Image( The little motor works its ok) Kind Regards.ImageImageImage

???????? ??? ?? SM-P605 ??? ??????????????? Tapatalk
User avatar
jarndice
Colonel
Posts: 8003
Joined: Mon Sep 03, 2012 11:27 am
Location: the mountains of hertfordshire

Re: Turret ring turning module not work

Post by jarndice »

I use the DKLM Turret rotation motors in most of my Panzers 4s, I did notice that the soldered wires coming out of the motor body were prone to failure and would short until I did a proper job of soldering the wires in place.
I think I am about to upset someone :haha:
User avatar
leopardgreece
Corporal
Posts: 491
Joined: Tue Oct 27, 2015 1:48 pm

Re: Turret ring turning module not work

Post by leopardgreece »

But the motor works. I give it some current and its ok works

???????? ??? ?? SM-P605 ??? ??????????????? Tapatalk
Post Reply

Return to “Other electronics”