Increasing amplifier output

Talk about all other types of electronics here, such as batteries!
User avatar
General Jumbo01
Warrant Officer 1st Class
Posts: 1763
Joined: Sat Jul 14, 2018 8:06 pm
Location: I'm a Londoner that moved to Essex. Says it all really...:(

Re: Increasing amplifier output

Post by General Jumbo01 »

So.... you are using the movement of the speaker cone as a pump for the smoke generated in the smoker unit. I was beginning to think this was a wind up!

A filter as suggested could help but so would a long travel bass unit as it shifts more air. It will struggle with the upper frequencies a bit but you could retain a small high frequency speaker too (don't worry about a crossover) and just use the bass cone for the smoker 'pump'. I'd also recommend you use a funnel/cone shaped behind the speaker cone so the air is funneled into the smoker rather than left to itself to find a hole/tube to get there.

That 'other' KT video example certainly works well. Copy that?? ;)

Good luck...l might follow suite!

Sent from my ASUS_T00G using Tapatalk
Owner - Fuckleburgh Tank Collection
Post Reply

Return to “Other electronics”