Convoy Light Hook Up?
Convoy Light Hook Up?
I received a cool early style convoy light and I was wondering if I could simply hook it up to the speaker wires. It came with a resistor. I don’t have any connectors but I originally thought I would connect it to the headlight wiring but I want to eliminate an extra connection between the hull and the chassis. The convoy light is a SMD LED. Any better ideas or suggestions?
- Attachments
-
- 3A026C16-0341-4435-9C09-F70302A8E193.jpeg (40.75 KiB) Viewed 3645 times
Re: Convoy Light Hook Up?
I connected mine to like this.
A jst 2.5 connector to be able to take it off. The wires go to the wires for the front lights. So it comes on with the front lights. No need for resistors as these pins give the required voltage.
Sent from my POCOPHONE F1 using Tapatalk
A jst 2.5 connector to be able to take it off. The wires go to the wires for the front lights. So it comes on with the front lights. No need for resistors as these pins give the required voltage.
Sent from my POCOPHONE F1 using Tapatalk
Started as a tank man.
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
Re: Convoy Light Hook Up?
In case you can't see. The wires are soldered to the relevant pins of the upper hull cable. This eliminates another direct connection to the upper hull. The jst is optional.
Sent from my POCOPHONE F1 using Tapatalk
Sent from my POCOPHONE F1 using Tapatalk
Started as a tank man.
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
Re: Convoy Light Hook Up?
Thanks for the reply and photos. Looks like a good idea.
Re: Convoy Light Hook Up?
For crying out loud! I just realized that the Taigen V3 mfu has a socket designated as “tail light”. Guess I’ll hook into that. Sorry for asking a silly question. I blame the whiskey.
Re: Convoy Light Hook Up?
That's a nice surprise. We'll spotted. Perhaps the whiskey helped?Jimster wrote:For crying out loud! I just realized that the Taigen V3 mfu has a socket designated as “tail light”. Guess I’ll hook into that. Sorry for asking a silly question. I blame the whiskey.
Elmod Fusion ECO has no light ports. Need to improvise.
Sent from my POCOPHONE F1 using Tapatalk
Started as a tank man.
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
Re: Convoy Light Hook Up?
Got it working. I love the way it looks. Gives the rear end a little more eye candy
- Attachments
-
- 96EAEE3C-3A48-4720-AD5D-40FBFED386B3.jpeg (42.49 KiB) Viewed 3572 times
Re: Convoy Light Hook Up?
The tank itself appears to be well done. Quite some weathering.
Sent from my POCOPHONE F1 using Tapatalk
Sent from my POCOPHONE F1 using Tapatalk
Started as a tank man.
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
Re: Convoy Light Hook Up?
Thanks. I tried not to overdo the weathering but without rear mud flaps I figured the corners would take a beating. I need to add a spot or two on the convoy light but for now I enjoy it’s new look.
- jarndice
- Colonel
- Posts: 8017
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Convoy Light Hook Up?
Amongst the MFUs in my Tanks I have an ASP2 as well as a Taigen V2 in a couple of Panzer 4s, both of these boards have a rear light socket.
I have always wired my "Notek" Light to the headlight points on the daughter board in the PZ4 Tank Body with a switch to separate it from the headlights.,
I was wondering if I buy a PZ4 Convoy lamp and plug it into the rear light socket of the ASP2 or V2 could I wire the "Notek" light into the rear light socket as well instead of the headlight position on the daughter board ?
I have always wired my "Notek" Light to the headlight points on the daughter board in the PZ4 Tank Body with a switch to separate it from the headlights.,
I was wondering if I buy a PZ4 Convoy lamp and plug it into the rear light socket of the ASP2 or V2 could I wire the "Notek" light into the rear light socket as well instead of the headlight position on the daughter board ?
I think I am about to upset someone