Order Upgrade speaker

Talk about all other types of electronics here, such as batteries!
User avatar
Ghosttjr
Recruit
Posts: 47
Joined: Sat Jul 07, 2018 7:47 pm

Order Upgrade speaker

Post by Ghosttjr »

I want to order a new speaker https://www.rctank.de/LAUTSPRECHER
I have the Taigen V3 MFU but can it handle 4 or 8ohm ? Is the stock Taigen speaker 4 or 8ohms?
I opened the stock speakerbox on my tank but there is no writing on the speaker
Image this is the Taigen speaker I want to replace


Verzonden vanaf mijn iPhone met Tapatalk
User avatar
midlife306
Warrant Officer 1st Class
Posts: 2238
Joined: Sun Aug 27, 2017 10:34 am

Order Upgrade speaker

Post by midlife306 »

These are what I use & the cheapest Iv found.
Visaton FR7 4 Ohm Fullrange Round Speaker 6.5cm Diameter https://rover.ebay.com/rover/0/0/0?mpre ... 2512671499
Cheers
Wayne


Sent from my iPhone using Tapatalk
User avatar
Ghosttjr
Recruit
Posts: 47
Joined: Sat Jul 07, 2018 7:47 pm

Re: Order Upgrade speaker

Post by Ghosttjr »

Do u use it on a Taigen MFU V1/2/3?
Thanks for your response
User avatar
midlife306
Warrant Officer 1st Class
Posts: 2238
Joined: Sun Aug 27, 2017 10:34 am

Re: Order Upgrade speaker

Post by midlife306 »

You can actually measure the ohm value of your current speaker with a multimeter, have the speaker sat steady on a flat surface as per the pic above & measure the resistance between the two wires.
Cheers
Wayne


Sent from my iPhone using Tapatalk
User avatar
midlife306
Warrant Officer 1st Class
Posts: 2238
Joined: Sun Aug 27, 2017 10:34 am

Re: Order Upgrade speaker

Post by midlife306 »

I’ve used it on various boards
Cheers
Wayne


Sent from my iPhone using Tapatalk
User avatar
Ghosttjr
Recruit
Posts: 47
Joined: Sat Jul 07, 2018 7:47 pm

Re: Order Upgrade speaker

Post by Ghosttjr »

midlife306 wrote:You can actually measure the ohm value of your current speaker with a multimeter, have the speaker sat steady on a flat surface as per the pic above & measure the resistance between the two wires.
Cheers
Wayne

Thanks so much ! I was thinking last night of doing just that :P
Image
Is this the right setting on my multimeter?
(I put my stock Taigen speaker in a cardboard box lol (also helps with bass))


Sent from my iPhone using Tapatalk


Verzonden vanaf mijn iPhone met Tapatalk
User avatar
midlife306
Warrant Officer 1st Class
Posts: 2238
Joined: Sun Aug 27, 2017 10:34 am

Re: Order Upgrade speaker

Post by midlife306 »

Brilliant
Cheers
Wayne


Sent from my iPhone using Tapatalk
User avatar
RenoirLV
Corporal
Posts: 327
Joined: Mon Jan 22, 2018 12:58 pm
Location: Riga, Latvia

Re: Order Upgrade speaker

Post by RenoirLV »

I have this speaker with HL latest gen controller. It is louder than stock HL.

Sent from my POCOPHONE F1 using Tapatalk
Started as a tank man.
2x early Tiger 1's made from parts of HL, Taigen, Mato and whatever I saw suitable.
Ural 4320 (~1/12)
WPL B36 Ural
User avatar
midlife306
Warrant Officer 1st Class
Posts: 2238
Joined: Sun Aug 27, 2017 10:34 am

Order Upgrade speaker

Post by midlife306 »

Wardog wrote: just going to jump in ,car speakers will take 8ohms because the sound out put or number is,in most is higher than an 8ohms hifi speaker.
That's where you're wrong Mr Wardog
The speaker is what has the ohm rating, it's the resistance in ohms of the speaker.
It's the amplification that can struggle if the speaker resistance is not suited to it.
Car speakers are normally rated at 4 ohms but usually measure slightly less.
Volume wise, with the same amplification a 4 ohm speaker will be louder than an 8 ohm speaker of the same size.
Cheers
Wayne


Sent from my iPad using Tapatalk
User avatar
Son of a gun-ner
Lieutenant-Colonel
Posts: 6865
Joined: Sun May 07, 2017 8:49 pm
Location: Surrey UK

Re: Order Upgrade speaker

Post by Son of a gun-ner »

Yep, I can confirm. I once bought by mistake 16 ohm headphones for my walkman instead of 8, was like listening through cotton wool.
As for what components "take," speakers in this instance, they are given the available volts, they take what amps they want (or try too), and their resistance is down to their construction. Therefore, a 4 ohm speaker will try to draw more amps from its source than the 8 ohm, in this case the control board (m f u). If the control board can't handle the speakers demand something will burn out.
Mick - The grit in the underpants of life!
And always happy to spare the bytes

TOTM needs YOU :thumbup: support YOUR TOTM competition, I'm doing my part, are YOU?
Post Reply

Return to “Other electronics”