Jagtiger in need of a reboot
Re: Jagtiger in need of a reboot
Thanks John1970.
Re: Jagtiger in need of a reboot
I'm going to refit the Original Taigen CB and try to get it to work with my existing Tiger 1 Taigen Transmitter.
If that works, I'll need to source another Taigen Transmitter and fix some of the wiring in the top of the tank.
If that doesn't work, I'll need a Taigen v3 CB and Transmitter and still need to fix the existing top wiring.
I'll sell the v7.0 CB and Transmitter.
That sound like a plan ?
If that works, I'll need to source another Taigen Transmitter and fix some of the wiring in the top of the tank.
If that doesn't work, I'll need a Taigen v3 CB and Transmitter and still need to fix the existing top wiring.
I'll sell the v7.0 CB and Transmitter.
That sound like a plan ?
- jarndice
- Colonel
- Posts: 8023
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Jagtiger in need of a reboot
If you go to----Hwal2605 wrote:I'm going to refit the Original Taigen CB and try to get it to work with my existing Tiger 1 Taigen Transmitter.
If that works, I'll need to source another Taigen Transmitter and fix some of the wiring in the top of the tank.
If that doesn't work, I'll need a Taigen v3 CB and Transmitter and still need to fix the existing top wiring.
I'll sell the v7.0 CB and Transmitter.
That sound like a plan ?
http://www.forgebeartanks.com
he is selling a complete boxed set of V3 Taigen Transmitter and V3 Control Board which includes speaker, sound module, volume control and servo leads £77, He is also selling the same items separately,
If you don't already know Dave is a member of this Forum and the fairest dealer in the hobby.
I think I am about to upset someone
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: Jagtiger in need of a reboot
Good evening, it is indeed a very good plan, and as Jarndice suggests, it is easy to find the complete set, including wiring, with cords equipped with the necessary plugs, you will just have to weld again, and will greatly facilitate the work
Already owning a Tiger I Taigen, you already have the possibility of copying
Already owning a Tiger I Taigen, you already have the possibility of copying
Re: Jagtiger in need of a reboot
Great, I'm pleased with that and really appreciate everyone's help and comments.
I'm not around for a week or so, so I'll probably post an update in a couple of weeks.
Thanks again.
I'm not around for a week or so, so I'll probably post an update in a couple of weeks.
Thanks again.
Re: Jagtiger in need of a reboot
Easiest thing to do is fit the taigen board into your tiger to test it as it will be a straight swap.
If you fit it back into the jagdtiger then your starting from the beginning again as not everything is wired up and you wont be able to test all the functions
If you fit it back into the jagdtiger then your starting from the beginning again as not everything is wired up and you wont be able to test all the functions
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: Jagtiger in need of a reboot
See her, no malice, no annoyancejohn1970 wrote:Easiest thing to do is fit the taigen board into your tiger to test it as it will be a straight swap.
If you fit it back into the jagdtiger then your starting from the beginning again as not everything is wired up and you wont be able to test all the functions
I don't understand what would go wrong? Tiger I: 2 headlights and turret rotation, Jagdtiger: oneheadlight, and no turret rotation, tell you about the absence of the switch on BB firing? I would be surprised that absent? view that no photo of the side concerned, and all the BB shots removed from my tanks (same as the photo) had one!!
Re: Jagtiger in need of a reboot
Hi all,
I've been on holiday, so no posts.
An update on where I am. I took up the suggestion that I Bind my Taigen Transmitter to the JagTiger and see if it worked, and it did, sort of. I got sound, motion and (probably) smoke (still to be tested). However, When I plugged in the Upper hull connector, the tank switched off and I obviously got no lights or other upper hull functions.
So, some progress. There remains two jobs to do, I think.
The "big" job is that I need to rewire the upper hull, or at least fix the current "dogs breakfast" wiring. - any suggestions would be appreciated.
The "small" job is to source a Taigen transmitter V1-3? at a reasonable price- again any suggestions appreciated.
I've been on holiday, so no posts.
An update on where I am. I took up the suggestion that I Bind my Taigen Transmitter to the JagTiger and see if it worked, and it did, sort of. I got sound, motion and (probably) smoke (still to be tested). However, When I plugged in the Upper hull connector, the tank switched off and I obviously got no lights or other upper hull functions.
So, some progress. There remains two jobs to do, I think.
The "big" job is that I need to rewire the upper hull, or at least fix the current "dogs breakfast" wiring. - any suggestions would be appreciated.
The "small" job is to source a Taigen transmitter V1-3? at a reasonable price- again any suggestions appreciated.
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: Jagtiger in need of a reboot
Hello, personally I still haven't found the photo or there is a modified 10-pin connector? but possible!!! if you follow each wire in the photo already attached, you should be able to find the correct wiring, in principle the colors of the cord correspond
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: Jagtiger in need of a reboot
there are also many connectors of all kinds, one can everywhere, which may be the cause of many false contacts