Heng Long barrel recoil
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
Heng Long barrel recoil
Hi all, any ideas if this could be used with the Heng Long 6.0/ 7.0mfu to allow servo recoil operation
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
Re: Heng Long barrel recoil
Cant load the bloody image, will keep trying
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
Re: Heng Long barrel recoil
Its the taigen signal converter it can be used but its not very good just in out. I tried it thought it was a wasted effort to get working so just bought a 6.1 board
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
Re: Heng Long barrel recoil
Thanks for the reply, I was intending to replace my 6.0 with a 7.1 from forgebear as and when they become
available, however Dave is not going to be selling the 7.1
The sounds on the 7.0 (2 of them) do sound better than the 6.0 so was looking to try to achive recoil with it.
regards John
available, however Dave is not going to be selling the 7.1
The sounds on the 7.0 (2 of them) do sound better than the 6.0 so was looking to try to achive recoil with it.
regards John
- HERMAN BIX
- Brigadier
- Posts: 10238
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: Heng Long barrel recoil
Invest in a HL 6.1S board Mr Wigbearer, they are much more user friendly imo.
Servo and standard function options, 4 sounds, and light switch options.
Servo and standard function options, 4 sounds, and light switch options.
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
Re: Heng Long barrel recoil
Thanks for the reply Herman, Thats sound advise and probably the best way to proceed, I do however
prefer the smoother sounds on the 7.0, Might hang on until the 7.1 becomes more readily available and
see what they will cost.
prefer the smoother sounds on the 7.0, Might hang on until the 7.1 becomes more readily available and
see what they will cost.