along with my tanks I got some RC components. I've tried to just get them to run, Just plugged in the power and speaker to hear some life. could hear an electronic click from the speaker as the power went on and off on both boards.
the power switch on the Teigen controller is flaky and needs me to hold in place. I really love the look of the one labelled T4EU.
Unfortunately I can't get either of them to run with the heng long boards that have been suppled. I believe one is a V5.0 and the other a V5.2, I've tired looking for wiring diagrams but most of them I find show a handy looking blue 2 pin port for pairing. I believe I have a 3-pin in the "CN8" positions, I've looked around but have no electronic that will fit in that port. So not really sure how to get it working.
A pairing puzzle
- stu_the_flat
- Lance Corporal
- Posts: 183
- Joined: Sun Oct 17, 2021 8:19 am
- Location: Glasgow
-
- Warrant Officer 1st Class
- Posts: 1664
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: A pairing puzzle
Hello,
you try to link two transmitters, which are incompatible with the turntables in photos indeed the one on the left is a Taigen, therefore incompatible with a Heng Long, Taigen or Heng Long turntable, are dedicated transmitters, it is the turntable which makes receiver, dimmers, etc. and protocol differ.When has the one on the right, totally incompatible with the previous system because you need a Receiver, to make it work, and with the electronics that go well behind.
Heng Long board, with wiring diagram Taigen board, transmitter compatible
you try to link two transmitters, which are incompatible with the turntables in photos indeed the one on the left is a Taigen, therefore incompatible with a Heng Long, Taigen or Heng Long turntable, are dedicated transmitters, it is the turntable which makes receiver, dimmers, etc. and protocol differ.When has the one on the right, totally incompatible with the previous system because you need a Receiver, to make it work, and with the electronics that go well behind.
Heng Long board, with wiring diagram Taigen board, transmitter compatible
-
- Warrant Officer 1st Class
- Posts: 1664
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: A pairing puzzle
For info,transmeter Radiolink
http://wiki.sunfounder.cc/index.php?tit ... ransmitter
http://wiki.sunfounder.cc/index.php?tit ... ransmitter
- stu_the_flat
- Lance Corporal
- Posts: 183
- Joined: Sun Oct 17, 2021 8:19 am
- Location: Glasgow
Re: A pairing puzzle
Thank you... so I'm going to have to spend money to fix this, Not fair!
-
- Warrant Officer 1st Class
- Posts: 1664
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: A pairing puzzle
yes, and two solutions, ie a single board, so sure that the Taigen emitter works?
https://www.rctank.de/Taigen-24-GHz-V1- ... -et-autres
either transmitter and new plate assembly
https://www.rctank.de/Taigen-kit-comple ... -et-autres
see also at this recommended supplier? member of the forum
https://www.forgebeartanks.com/store/c1 ... ducts.html
If I am not mistaken, I think it is a second-hand purchase? if so, you have to see how the interior of the tank (s) is equipped? cabling, electronic accessories, etc.
to date there are new, more efficient turntables, I would advise you to contact "Forgeaber" for further advice, on the type of equipment and depending on the amount you wish to invest
https://www.rctank.de/Taigen-24-GHz-V1- ... -et-autres
either transmitter and new plate assembly
https://www.rctank.de/Taigen-kit-comple ... -et-autres
see also at this recommended supplier? member of the forum
https://www.forgebeartanks.com/store/c1 ... ducts.html
If I am not mistaken, I think it is a second-hand purchase? if so, you have to see how the interior of the tank (s) is equipped? cabling, electronic accessories, etc.
to date there are new, more efficient turntables, I would advise you to contact "Forgeaber" for further advice, on the type of equipment and depending on the amount you wish to invest
Re: A pairing puzzle
Heng long boards will only work with heng long controllers and they both have to be the same version so finding a controller that will work with your boards will be difficult and probably over priced. Even then you wont know if the boards are fully working until you've spent the money. The easiest and cheapest way is to replace them with newer boards that come with controllers.
- stu_the_flat
- Lance Corporal
- Posts: 183
- Joined: Sun Oct 17, 2021 8:19 am
- Location: Glasgow
Re: A pairing puzzle
thanks guys, its put a spanner in the works. I've shopped with forgebear quite a bit. I'll probably go with the most affordable modern controller with Dave. oh wait that seems to be the V7 now! Anybody else thinks the Abram's sounds a bit like a vacuum cleaner?
- HERMAN BIX
- Brigadier
- Posts: 10299
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: A pairing puzzle
I agree the V7 abrams sounds like a vacuum cleaner too !!
The ever evolving H/L control system is going to be a problem to keep older tanks in action.
As others have suggested, best to remove the older ones and replace with a matched set of board and transmitter, or in the case of the V6 range, one transmitter can be paired with many boards. I have 3 tanks on one H/L transmitter, all V6.1s.
The ever evolving H/L control system is going to be a problem to keep older tanks in action.
As others have suggested, best to remove the older ones and replace with a matched set of board and transmitter, or in the case of the V6 range, one transmitter can be paired with many boards. I have 3 tanks on one H/L transmitter, all V6.1s.
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85