HengLong 6.0s Setup

Discuss the good old Heng Long electronics here, whether its mods on them or anything else, it goes here!
Post Reply
User avatar
flyingbogey
Recruit
Posts: 21
Joined: Wed Aug 04, 2021 11:58 am
Location: London UK

HengLong 6.0s Setup

Post by flyingbogey »

I am in no doubt that I have done something quite daft with some nice random button presses. Having soured the web too I can find very little on the menu structure for the Tx/Rx of the 6.0s or how to set factory default config.
Anyway.
On right stick drive control I have managed to make Forward and Reverse drive stick right and left.
Stick forward and Back have no control..

Any thoughts on how to put Forward and Reverse on to stick Forward and Back?
Thanks in Advance.
“I'd far rather be happy than right any day.” Douglas Adams

HL Tiger...WIP
HL Pz IV AusfF1, Finishing touches
Robbe: Type VII B
Billings: Thor Coastguard
Partial scratch: Akula Class Sub
Rebuild: Vosper Perkasa
User avatar
Model Builder 4
2nd Lieutenant
Posts: 2329
Joined: Sun Jul 26, 2015 3:46 pm
Location: South Wales valleys
Contact:

Re: HengLong 6.0s Setup

Post by Model Builder 4 »

Do you have the operational manual for it ? I have a tk6.1s which came with one and I'm 99% sure that somewhere within it states the buttons that need to be pressed to move the steering from one stick to the other, I'm not certain if the 6.0s operates the same though :think: if you have no luck I will try and dig my manual out later this evening :thumbup:

Cheers,Lee.
Me ? Addicted ? Never !! :crazy:
User avatar
flyingbogey
Recruit
Posts: 21
Joined: Wed Aug 04, 2021 11:58 am
Location: London UK

Re: HengLong 6.0s Setup

Post by flyingbogey »

Hi Lee,

No I bought the setup from ebay as an upgrade.
It was working as expected when I first used it so I'm certain its my tomfoolery that broke it.
“I'd far rather be happy than right any day.” Douglas Adams

HL Tiger...WIP
HL Pz IV AusfF1, Finishing touches
Robbe: Type VII B
Billings: Thor Coastguard
Partial scratch: Akula Class Sub
Rebuild: Vosper Perkasa
User avatar
Model Builder 4
2nd Lieutenant
Posts: 2329
Joined: Sun Jul 26, 2015 3:46 pm
Location: South Wales valleys
Contact:

Re: HengLong 6.0s Setup

Post by Model Builder 4 »

Take a look at the link to another thread on the forum, it shows how to change the stick configuration, it's on page 2 towards the bottom :thumbup:

viewtopic.php?f=201&t=30903&start=20

Cheers, Lee.
Me ? Addicted ? Never !! :crazy:
User avatar
flyingbogey
Recruit
Posts: 21
Joined: Wed Aug 04, 2021 11:58 am
Location: London UK

Re: HengLong 6.0s Setup

Post by flyingbogey »

Hey there Lee,

The thread looks pertinent as I have swap my drive motors feeds over as the right left turn was back to front. I will restore that and fault find from there.
Thank you for the lead!
“I'd far rather be happy than right any day.” Douglas Adams

HL Tiger...WIP
HL Pz IV AusfF1, Finishing touches
Robbe: Type VII B
Billings: Thor Coastguard
Partial scratch: Akula Class Sub
Rebuild: Vosper Perkasa
User avatar
flyingbogey
Recruit
Posts: 21
Joined: Wed Aug 04, 2021 11:58 am
Location: London UK

Re: HengLong 6.0s Setup

Post by flyingbogey »

Model Builder 4 wrote:Take a look at the link to another thread on the forum, it shows how to change the stick configuration, it's on page 2 towards the bottom :thumbup:

viewtopic.php?f=201&t=30903&start=20

Cheers, Lee.

The thread had everything I needed. Thank you so much for the pointer!
“I'd far rather be happy than right any day.” Douglas Adams

HL Tiger...WIP
HL Pz IV AusfF1, Finishing touches
Robbe: Type VII B
Billings: Thor Coastguard
Partial scratch: Akula Class Sub
Rebuild: Vosper Perkasa
User avatar
Model Builder 4
2nd Lieutenant
Posts: 2329
Joined: Sun Jul 26, 2015 3:46 pm
Location: South Wales valleys
Contact:

Re: HengLong 6.0s Setup

Post by Model Builder 4 »

No worries, glad you got it sorted :D the great thing about the forum is the wealth of knowledge of it's members, you can bet your bottom dollar that somebody has encountered the same problems that you may be having and when this information is shared it can save a lot of headaches :thumbup:

Cheers,Lee.
Me ? Addicted ? Never !! :crazy:
User avatar
flyingbogey
Recruit
Posts: 21
Joined: Wed Aug 04, 2021 11:58 am
Location: London UK

Re: HengLong 6.0s Setup

Post by flyingbogey »

Model Builder 4 wrote:No worries, glad you got it sorted :D the great thing about the forum is the wealth of knowledge of it's members, you can bet your bottom dollar that somebody has encountered the same problems that you may be having and when this information is shared it can save a lot of headaches :thumbup:

Cheers,Lee.
There certainly is!
“I'd far rather be happy than right any day.” Douglas Adams

HL Tiger...WIP
HL Pz IV AusfF1, Finishing touches
Robbe: Type VII B
Billings: Thor Coastguard
Partial scratch: Akula Class Sub
Rebuild: Vosper Perkasa
Post Reply

Return to “Heng Long”