5.3 MFU
-
- Lance Corporal
- Posts: 189
- Joined: Wed Jan 27, 2021 12:41 pm
- Location: Stoke-on-Trent
5.3 MFU
A quick question- is it possible to dial down the recoil? I have a Panzer III that leaps like a frightened rabbit when the main armament fires!!
Thank you!
Thank you!
Last edited by SimonCornes on Thu May 27, 2021 8:45 pm, edited 1 time in total.
Re: 5.3 MFU
no need mako for it to stop the recoil
-
- Lance Corporal
- Posts: 189
- Joined: Wed Jan 27, 2021 12:41 pm
- Location: Stoke-on-Trent
Re: 5.3 MFU
Sorry?john1970 wrote:no need mako for it to stop the recoil
Re: 5.3 MFU
quick question quick answer ?
the 5.3 you cant adjust the recoil action if you fit a mako board you can cut it out
the 5.3 you cant adjust the recoil action if you fit a mako board you can cut it out
-
- Lance Corporal
- Posts: 189
- Joined: Wed Jan 27, 2021 12:41 pm
- Location: Stoke-on-Trent
Re: 5.3 MFU
Ok John, understood, I can't adjust the recoil! My option would be to change an HL 6.0 but of course I'd have a lot of plugs to rewire! Mako? Must enquire about that,
Thanks
Thanks
- HERMAN BIX
- Brigadier
- Posts: 10323
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: 5.3 MFU
http://rctanksaustralia.com/store/
Mako unit.
You do the reading and the ordering if you want it, I will help get it to you.
Other than one of these, you are stuck with the track recoil without a new style of board.
Mako unit.
You do the reading and the ordering if you want it, I will help get it to you.
Other than one of these, you are stuck with the track recoil without a new style of board.
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
-
- Lance Corporal
- Posts: 189
- Joined: Wed Jan 27, 2021 12:41 pm
- Location: Stoke-on-Trent
Re: 5.3 MFU
Thank you Herman. I had a look last night for Mako and saw something that cost around $60. If thats it then its cheaper to fit a more recent HL MFU! You would think that there would be a wire you could cut that sends the recoil signal, but if there was then it would have been the stock answer!!HERMAN BIX wrote:http://rctanksaustralia.com/store/
Mako unit.
You do the reading and the ordering if you want it, I will help get it to you.
Other than one of these, you are stuck with the track recoil without a new style of board.
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: 5.3 MFU
Hello,
was on the Australian Forum, at one time a scheme to carry out this with a relay? maybe Herman knows him? otherwise on rcuniverse there is this link below
https://www.rcuniverse.com/forum/rc-tan ... ost8102396
see rctankaustralian forum, ilny has a tutorial ... electronic post, but more pictures
was on the Australian Forum, at one time a scheme to carry out this with a relay? maybe Herman knows him? otherwise on rcuniverse there is this link below
https://www.rcuniverse.com/forum/rc-tan ... ost8102396
see rctankaustralian forum, ilny has a tutorial ... electronic post, but more pictures
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: 5.3 MFU
Forum rc tank Australia,link
http://www.rctanksaustralia.com/forum/v ... ?f=82&t=19
http://www.rctanksaustralia.com/forum/v ... ?f=82&t=19
-
- Lance Corporal
- Posts: 189
- Joined: Wed Jan 27, 2021 12:41 pm
- Location: Stoke-on-Trent
Re: 5.3 MFU
Unfortunately Jofaur86 thats all to do with the RX-18 MFU - thank God I don't have that!! The 5.3 is okay apart from poor engine sound and athletic recoil! The easy answer would be a 6.0 MFU!