Taigan turret

Discuss the good old Heng Long electronics here, whether its mods on them or anything else, it goes here!
Post Reply
stokes
Recruit
Posts: 6
Joined: Thu Dec 10, 2020 8:07 pm

Taigan turret

Post by stokes »

Hi all need some help have brought taigan turret with recoil and elevation with I have got working perfectly,my question is the turret also came with flash and I have no idea how to get this to work on henglong 6.0 from what I have heard it is a bit complicated but I now need this in my life.many thanks for any help Scott
I
User avatar
Jarlath
Corporal
Posts: 401
Joined: Mon Jun 27, 2016 2:45 pm
Location: Ontario, Canada
Contact:

Re: Taigan turret

Post by Jarlath »

If a 2pin LED connection, I'm pretty sure it is in LED1 connection (Labeled '1' in the series of 8 twin pin connections below speaker connection.)

Image
User avatar
Jarlath
Corporal
Posts: 401
Joined: Mon Jun 27, 2016 2:45 pm
Location: Ontario, Canada
Contact:

Re: Taigan turret

Post by Jarlath »

If it is a HID system that usually has a 5 pin connector, I'm not sure...
stokes
Recruit
Posts: 6
Joined: Thu Dec 10, 2020 8:07 pm

Re: Taigan turret

Post by stokes »

Thanks for replying ,the plug is a three pin
stokes
Recruit
Posts: 6
Joined: Thu Dec 10, 2020 8:07 pm

Re: Taigan turret

Post by stokes »

Looking at unit and wiring ,think it requires a constant 5+v supply and a trigger don't know what voltage trigger is,if trigger same voltage as outputs on henglong 6 then I can use outlet to trigger unit .Any thoughts on this idea .
Post Reply

Return to “Heng Long”