HL Pershing problem
HL Pershing problem
Hi guys
This is my first post here regarding one of my tanks. I did say hello in the new members thread.
Anyways I pulled out one of my Pershing tanks today thinking lets fire this thing up for the first time in years. I put in a freshly charged battery pack and new batteries into the transmitter and turned it on. Once on I checked turret rotation and that was good it work fine. I then tried to move the tank forward and could hear a low hum buzz noise from one of the motors but the tank wouldn't move aside from some intermittent spurts from the one motor. I took off the top turret to take a look and didn't see anything but still it was doing the same thing
What would you guys think the issue might be? Any help would be awesome
Jeremy
This is my first post here regarding one of my tanks. I did say hello in the new members thread.
Anyways I pulled out one of my Pershing tanks today thinking lets fire this thing up for the first time in years. I put in a freshly charged battery pack and new batteries into the transmitter and turned it on. Once on I checked turret rotation and that was good it work fine. I then tried to move the tank forward and could hear a low hum buzz noise from one of the motors but the tank wouldn't move aside from some intermittent spurts from the one motor. I took off the top turret to take a look and didn't see anything but still it was doing the same thing
What would you guys think the issue might be? Any help would be awesome
Jeremy
-
- Warrant Officer 1st Class
- Posts: 1664
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: HL Pershing problem
Good evening,
first thing, what type of Nicd (yellow) or Nimh (green) batteries date it year, charged with original HL block, or other type charger?
quel type émetteur? 27 ( antenne longue ) Mhz ou 2.4 Ghz
first thing, what type of Nicd (yellow) or Nimh (green) batteries date it year, charged with original HL block, or other type charger?
quel type émetteur? 27 ( antenne longue ) Mhz ou 2.4 Ghz
Re: HL Pershing problem
I'm using a venom battery and a prophet sport charger and there nimh
-
- Warrant Officer 1st Class
- Posts: 1664
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: HL Pershing problem
what type of radio, 27 Mhz or 2.4 Ghz, platinum RX 18? or other electronics?
Re: HL Pershing problem
It's a older rx13 board
-
- Warrant Officer 1st Class
- Posts: 1664
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: HL Pershing problem
Donc,correspond à ceci ?
http://www.hobbyhavoc.com/oldhavoc/inde ... opic=109.0
Perso je conseillerais de remplacer par une RX18 =2.4 GHz plus performante,
https://www.rc-panzershop.fr/ekmps/shop ... /hl2.4.pdf
will there be some wiring changes? but nothing insurmountable
http://www.hobbyhavoc.com/oldhavoc/inde ... opic=109.0
Perso je conseillerais de remplacer par une RX18 =2.4 GHz plus performante,
https://www.rc-panzershop.fr/ekmps/shop ... /hl2.4.pdf
will there be some wiring changes? but nothing insurmountable
Re: HL Pershing problem
Thank you for the link my friend I will take a look
Just in the last hour I found out I may have to put my cat down but will come back here when ready again, but thank you for all the help
Jeremy
Just in the last hour I found out I may have to put my cat down but will come back here when ready again, but thank you for all the help
Jeremy
- EAO
- Warrant Officer 2nd Class
- Posts: 1162
- Joined: Sun May 10, 2020 5:29 pm
- Location: Central Missouri, U.S. of A.
Re: HL Pershing problem
Jeremy,JeremyB wrote:Thank you for the link my friend I will take a look
Just in the last hour I found out I may have to put my cat down but will come back here when ready again, but thank you for all the help
Jeremy
I can't offer any advice about your RC tank issue, but I do offer my condolences about your cat. Just today I found out my German Shepherd has Pannus. 2020 I would like to forget...forever.
Regards,
Eric.
"You can always tell a German, you just can't tell him much." Anonymous.
German cars, German girls, German beer, German firearms, German Shepherds, German motorcycles... Not necessarily in that order though!
UP THE IRONS!
German cars, German girls, German beer, German firearms, German Shepherds, German motorcycles... Not necessarily in that order though!
UP THE IRONS!
Re: HL Pershing problem
Process of elimination! RX-13 controller is 27Mhz. Right joystick controls track direction correct? You have multiple controllers?
1. Tank Off. Hook up motor direct to 6-8V DC power. If motor turns then OK.
2. Switch frequency crystal to a different controller and turn both Transmitter and Tank on. Test controls, if still not working, it likely in the main board (RX-13). Test Old Transmitter on a different tank to ensure not transmitter issues *Gimbal potentiometers".
3. If Board is determined the failed item, replace.
1. Tank Off. Hook up motor direct to 6-8V DC power. If motor turns then OK.
2. Switch frequency crystal to a different controller and turn both Transmitter and Tank on. Test controls, if still not working, it likely in the main board (RX-13). Test Old Transmitter on a different tank to ensure not transmitter issues *Gimbal potentiometers".
3. If Board is determined the failed item, replace.
-
- Warrant Officer 1st Class
- Posts: 1664
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: HL Pershing problem
does the turret rotation work? therefore the radio does not operate anything that blocks the motors, remove the tracks, and see if the motors are running, also pay attention to the battery charge. there can be enough current for the turret, but not enough for both engines? if old and not maintained batteries? an element can be out of order! what voltage and capacity at the end of charging?