2.4Ghz Challenger 2 wont start
2.4Ghz Challenger 2 wont start
I’ve tried pairing to the the remote but it just won’t do anything. I’ve got power on both the tank and the remote but it’s not doing anything ... I’ve opened both up but I’ve no idea what I’m looking for ...
Help!
Scott
Help!
Scott
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: 2.4Ghz Challenger 2 wont start
Er....have you tried pressing the 'engine' start button?
What version of HL's electronics do you have in there? It would help to know
What version of HL's electronics do you have in there? It would help to know
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- forgebear
- Warrant Officer 1st Class
- Posts: 1808
- Joined: Fri Nov 21, 2008 11:15 pm
- Location: bedford
- Contact:
Re: 2.4Ghz Challenger 2 wont start
hi i dont know what version you have
have a look on the under side where the battery is see if there is a black button if so
follow this
turn on the radio and the tank
press and hold the start button on the radio
press the small black button in the base of the tank in the battery box
have a look on the under side where the battery is see if there is a black button if so
follow this
turn on the radio and the tank
press and hold the start button on the radio
press the small black button in the base of the tank in the battery box
Re: 2.4Ghz Challenger 2 wont start
I don’t know.. can’t find any markings .. can you tell from this photo43rdRecceReg wrote:Er....have you tried pressing the 'engine' start button?
What version of HL's electronics do you have in there? It would help to know
Scott in Shrewsbury
Ex Royal Navy
Diesel Head & Model builder
Re: 2.4Ghz Challenger 2 wont start
Yep tried all that and in various different orders too... makes no differenceforgebear wrote:hi i dont know what version you have
have a look on the under side where the battery is see if there is a black button if so
follow this
turn on the radio and the tank
press and hold the start button on the radio
press the small black button in the base of the tank in the battery box
Scott in Shrewsbury
Ex Royal Navy
Diesel Head & Model builder
- forgebear
- Warrant Officer 1st Class
- Posts: 1808
- Joined: Fri Nov 21, 2008 11:15 pm
- Location: bedford
- Contact:
Re: 2.4Ghz Challenger 2 wont start
if you look at the left hand side of the board there is a 3 pin wire track that back you should find a black button in your battery box of the tank
turn on the tank
and radio
press and HOLD the start button on the transmitter press the binding button that you found in the battery box on the tank
it will bind and start
dave
turn on the tank
and radio
press and HOLD the start button on the transmitter press the binding button that you found in the battery box on the tank
it will bind and start
dave
Re: 2.4Ghz Challenger 2 wont start
Dave... not it won’t!! Lolforgebear wrote:if you look at the left hand side of the boar there is a 3 pin wire track that back you should find a black button in your battery box of the tank
turn on the tank
and radio
press and HOLD the start button on the transmitter press the binding button that you found in the battery box on the tank
it will bind and start
dave
Scott in Shrewsbury
Ex Royal Navy
Diesel Head & Model builder
- forgebear
- Warrant Officer 1st Class
- Posts: 1808
- Joined: Fri Nov 21, 2008 11:15 pm
- Location: bedford
- Contact:
Re: 2.4Ghz Challenger 2 wont start
ok if thats wont do it its either the board or the transmitter
did you find the small black button
did you find the small black button
Re: 2.4Ghz Challenger 2 wont start
Yes. Tried all different combinations of pressing the buttons to get it to bind but as Del Trotter one said “nitto”
Scott in Shrewsbury
Ex Royal Navy
Diesel Head & Model builder
Scott in Shrewsbury
Ex Royal Navy
Diesel Head & Model builder