Stug III recoil and strobe problems

Discuss the good old Heng Long electronics here, whether its mods on them or anything else, it goes here!
Post Reply
User avatar
capt midnight
Corporal
Posts: 497
Joined: Wed Oct 28, 2015 4:22 am
Location: Southern Indiana

Stug III recoil and strobe problems

Post by capt midnight »

I just came into possession of a 27Mhz Stug III. Everything seems to be working, but the recoil and LED are not. I located a wiring diagram on the forum, but it doesn't seem to be the right one. The schematic is showing a relay and I can't find any such thing in my stug.

Does anyone have a wiring layout for this configuration? At this point I'm not sure if I have a wiring problem or maybe a bad RX18.


Thanks!

Bill
"Yeah, but it's a dry heat!"
Private Hudson (Bill Paxton) ALIENS
Thewalrusman
Recruit
Posts: 6
Joined: Sun Apr 15, 2018 7:52 am

Re: Stug III recoil and strobe problems

Post by Thewalrusman »

Hi,
sorry to tag on to your old post but did you ever figure out the gun led staying on. I’ve just got hold of an old Stug, fitted a Taigen mfu that I know works, and am having the same issue.

Thanks
George
Post Reply

Return to “Heng Long”