Simplified rewiring of HL Part 1

Discuss the good old Heng Long electronics here, whether its mods on them or anything else, it goes here!
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Simplified rewiring of HL Part 1

Post by Jofaur86 »

I think there is confusion? the video shows a modification of an Asiatam system? which is not the case. the concern is that it is the new system from Taigen, which in order to make disassembly easy, used connectors instead of soldering as originally. This must work on HL, but in this case, not simple without taking part of the wiring
D63339F1-D036-47B2-8888-367E0C407737.jpeg
wiring,
1: signal wire, taken from the barrel recoil switch, rearmost pin
2: platinum power supply, from small inter-general plug
3: link to the reversing servo,
Operating principle: during the barrel recoil it is sent more than 5 volts on this plate, which converts this into a signal for the servo. the 3-pin plug (red, black, black) is the gun elevation and firing motors, the red one Being common and black each engine, schematic attached. Hope I'm clear, and sorry for my poor English.
D094D54C-58ED-4708-ADC4-4A391F839817.jpeg
D094D54C-58ED-4708-ADC4-4A391F839817.jpeg (46.6 KiB) Viewed 1561 times
shangovi
Recruit
Posts: 21
Joined: Sat Mar 13, 2021 4:07 pm
Location: USA

Re: Simplified rewiring of HL Part 1

Post by shangovi »

Thanks for the great and detailed reply - I will get to this ASAP and will post the results :)
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Simplified rewiring of HL Part 1

Post by Jofaur86 »

8O
can you do this photo again? clearer and sharper, in order to better see the existing connector? is that your top frame? there is only the turret which is Taigen? if this is the case, should be simpler for the resumption of the wiring
744FB062-9855-4794-B92A-0BE5EE670643.jpeg
shangovi
Recruit
Posts: 21
Joined: Sat Mar 13, 2021 4:07 pm
Location: USA

Re: Simplified rewiring of HL Part 1

Post by shangovi »

Hope these help?Image


Sent from my iPhone using Tapatalk
shangovi
Recruit
Posts: 21
Joined: Sat Mar 13, 2021 4:07 pm
Location: USA

Re: Simplified rewiring of HL Part 1

Post by shangovi »

Image


Sent from my iPhone using Tapatalk
shangovi
Recruit
Posts: 21
Joined: Sat Mar 13, 2021 4:07 pm
Location: USA

Re: Simplified rewiring of HL Part 1

Post by shangovi »

Image


Sent from my iPhone using Tapatalk
shangovi
Recruit
Posts: 21
Joined: Sat Mar 13, 2021 4:07 pm
Location: USA

Re: Simplified rewiring of HL Part 1

Post by shangovi »

Image


Sent from my iPhone using Tapatalk
shangovi
Recruit
Posts: 21
Joined: Sat Mar 13, 2021 4:07 pm
Location: USA

Re: Simplified rewiring of HL Part 1

Post by shangovi »

Image


Sent from my iPhone using Tapatalk
shangovi
Recruit
Posts: 21
Joined: Sat Mar 13, 2021 4:07 pm
Location: USA

Re: Simplified rewiring of HL Part 1

Post by shangovi »

These pictures are the original HL wiringImage


Sent from my iPhone using Tapatalk
Post Reply

Return to “Heng Long”