Elmod recoil mechanics for Haya servo airsoft recoil

Here is the place to talk about everything El-Mod! Help with installing and upgrading ect.
Post Reply
Mr tank a lot
Lance Corporal
Posts: 146
Joined: Sat Dec 25, 2021 9:16 pm

Elmod recoil mechanics for Haya servo airsoft recoil

Post by Mr tank a lot »

Dear All

I’m a complete idiot where it comes to aftermarket boards.
I have gotten a very thing else in the Elmod working, but the BB recoil just doesn’t work as it should.
The only setting it sort of works on is “standard” goes nuts on the airsoft and bb taigen servo recoil.
The BB unit winds up at the same time as the servo recoils, it should wind up the bb unit, fires ball and recoil servo and sound happen as ball is leaving bb unit.

Is there a setting I’m missing? Or is the fusion pro out of date for the new 6.1s heng long servo supported boards?.

Thanks!

https://youtu.be/PLmXA-IGQzs

Skip to end, or you might die of boredom
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Elmod recoil mechanics for Haya servo airsoft recoil

Post by Jofaur86 »

:D Hello, unless I'm mistaken? it seems to me that you omitted the post "introduce yourself" it will be nicer to know a little more about you, your knowledge, passions, etc. And you will get more answers. Thank you in advance
Mr tank a lot
Lance Corporal
Posts: 146
Joined: Sat Dec 25, 2021 9:16 pm

Re: Elmod recoil mechanics for Haya servo airsoft recoil

Post by Mr tank a lot »

Hi!

Sorry I tried to but it came up with “see administrators because code was not recognised” thought I’d give a post a go and that worked.

Many apologies I’ll do it now.
8thDay
Recruit
Posts: 1
Joined: Thu Dec 23, 2021 1:24 pm

Re: Elmod recoil mechanics for Haya servo airsoft recoil

Post by 8thDay »

Jofaur86 wrote::D Hello, unless I'm mistaken? it seems to me that you omitted the post "introduce yourself" it will be nicer to know a little more about you, your knowledge, passions, etc. And you will get more answers. Thank you in advance
I am a new member here and with respect I find the above post quite extraordinary. I am a contributing member of several specialist interest forums and have never encountered a post with such a sarcastic sounding phrase as "unless I'm mistaken" when replying to a newcomer.

Hopefully I've got completely the wrong end of the stick .....
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1979
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: Elmod recoil mechanics for Haya servo airsoft recoil

Post by Rad_Schuhart »

8thDay wrote:
Jofaur86 wrote::D Hello, unless I'm mistaken? it seems to me that you omitted the post "introduce yourself" it will be nicer to know a little more about you, your knowledge, passions, etc. And you will get more answers. Thank you in advance
I am a new member here and with respect I find the above post quite extraordinary. I am a contributing member of several specialist interest forums and have never encountered a post with such a sarcastic sounding phrase as "unless I'm mistaken" when replying to a newcomer.

Hopefully I've got completely the wrong end of the stick .....
Our good friend Jofaur is French and he does not speak english very well, but even when he tries his best, sometimes what he writtes is not absolutelly clear or correct, but not doubt is something related with the translation. Anyway it is true that introducing yourself is required in this forum and I believe is a great thing to do.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
User avatar
HERMAN BIX
Brigadier
Posts: 10234
Joined: Sun Jan 12, 2014 12:15 am
Location: Gold Coast,Australia

Re: Elmod recoil mechanics for Haya servo airsoft recoil

Post by HERMAN BIX »

Indeed the concept of going to the introduction section as a matter of courtesy is an expectation here.
mr Jofaur uses a translator to communicate which is perfectly fine.
His reference to perhaps being mistaken was no more than an admission that he may have in fact missed the introduction post in my interpretation.
We do encourage members to guide and inform new arrivals as to the expected way of first turning up, with the understanding that folks have differing levels of computer literacy & understanding of forum platforms.

Thank you Mr Rad for your added clarification, we are certain Mr Jofaur meant no ill intent.
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Elmod recoil mechanics for Haya servo airsoft recoil

Post by Jofaur86 »

:) Hello 8thday,
am I surprised by your message? my intention was just to point out, what would be good to present to you? and not offend you. Sorry I don't speak your language? and resume studies at my age? I therefore use google translate, with all that this entails as a risk of error? nothing else found? (well yes, well another solution :silent: ) I do my best as "Rad" says but there are hiccups. It is true that currently I am very active on the forum, maybe too much? I'll leave it there, wishing you a good week.
john1970
Corporal
Posts: 372
Joined: Sun Jun 02, 2013 2:29 pm

Re: Elmod recoil mechanics for Haya servo airsoft recoil

Post by john1970 »

I dont know anything about the fusion pro but on the heng long 6.1 the bb gun winds up and triggers the micro switch this then triggers the servo recoil so you have bb fire and recoil at the same time if the fusion pro doesn't use a micro switch to trigger the servo then the servo will just go when triggered by the controller.
Post Reply

Return to “El-Mod”