Hello,
With Elmod Think Tank Pro II card,and IV Blaster,I wonder if the possibility,of volume control from TX ?
Nothing seen or read on the manual. For this function?thank you in advance for réponse
Elmod Think Tank
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Elmod Think Tank
Morning, Jofaur!
I had never heard of this module before, and it's obsolescent status is confirmed by there being no mention of it, in Elmod's current list of products.
I'm guessing the it was the forerunner of the Fusion series, but lacked the ESC and sound capability those modules now have.
The option to control the (also obsolete) Blaster unit would be through channels 7, and 8 according to the pdf. No more information is given on generating sounds, it appears.
You may have seen Licmas Tanks' video of a Tiger 1 equipped with these units before. If not, It's worth a look, even if your German is a bit rusty.
The pdf (In English ) for the module can be found here:
https://elmod.eu/pdf/archive/PROIIflex_english.pdf
I had never heard of this module before, and it's obsolescent status is confirmed by there being no mention of it, in Elmod's current list of products.
I'm guessing the it was the forerunner of the Fusion series, but lacked the ESC and sound capability those modules now have.
The option to control the (also obsolete) Blaster unit would be through channels 7, and 8 according to the pdf. No more information is given on generating sounds, it appears.
You may have seen Licmas Tanks' video of a Tiger 1 equipped with these units before. If not, It's worth a look, even if your German is a bit rusty.
The pdf (In English ) for the module can be found here:
https://elmod.eu/pdf/archive/PROIIflex_english.pdf
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
Re: Elmod Think Tank
This video is 7 years old , would it not be better just sell the stuff and buying a new Elmod fusion board. A simple solution.
Re: Elmod Think Tank
I don't believe this was a function of the Blaster IV, so unless you can rig some kind of linkage that allows you to turn the volume control with a servo you are out of Luck.Jofaur86 wrote:Hello,
With Elmod Think Tank Pro II card,and IV Blaster,I wonder if the possibility,of volume control from TX ?
For a definitive answer, contact Thomas at the El-Mod website.
-
- Warrant Officer 1st Class
- Posts: 1664
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: Elmod Think Tank
Thank you,for your answer I haven’t tested yet the Pro II turntable is refurbished 1.10 BL and the Blaster 1.13 BL....For German langue,Google translation will be my friend
-
- Warrant Officer 1st Class
- Posts: 1664
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: Elmod Think Tank
Yes are you right already tried,but without success,then either use or !on the other hand is it not an Eco type ? There are 3 servos outputs .ronnie42 wrote:This video is 7 years old , would it not be better just sell the stuff and buying a new Elmod fusion board. A simple solution.