Help connecting elmod pro on torro tank...
-
- Private
- Posts: 60
- Joined: Wed Sep 09, 2020 2:29 pm
Help connecting elmod pro on torro tank...
Almost done...
but now im stuck...
I pluggeg the receiver cable on the board.... but now what????
I have a flysky ia10b to plug....as u can see in the pic... lot of cables with black pin... that i think are channels that go into the receiver... but...
How?????
I have a new radiomaster tx16s... virgin... to pair wirh the board... but...
How???????? Wanna cry....
Anyone could please help me???
Re: Help connecting elmod pro on torro tank...
I have the same set up. Here’s my receiver wire connections. Hope this helps.
Ignore my servo connection to channel 9. You won’t have that.
Sent from my iPhone using Tapatalk
Ignore my servo connection to channel 9. You won’t have that.
Sent from my iPhone using Tapatalk
- Rad_Schuhart
- Warrant Officer 1st Class
- Posts: 1989
- Joined: Tue Jan 19, 2016 9:22 am
- Location: Spanish living in Graz, Austria. Heart in UK.
- Contact:
Re: Help connecting elmod pro on torro tank...
Hi friend, the ideal port for the + and - wire, is where it says VCC. You connected it in a sensors port. Works, but it is better the other one.Jimster wrote:I have the same set up. Here’s my receiver wire connections. Hope this helps.
Ignore my servo connection to channel 9. You won’t have that.
Sent from my iPhone using Tapatalk
And for Andreabert:
https://www.elmod.eu/pdf/Fusion_RevF_english.pdf
Reading and understanding the manual will save you a lot of trouble.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
https://radindustries.wordpress.com/
Re: Help connecting elmod pro on torro tank...
Wow! Thanks for that. Changing it now.
Re: Help connecting elmod pro on torro tank...
Done! Looks better.
Re: Help connecting elmod pro on torro tank...
Are you using the correct binding settings, i am away until Sunday night. Had trouble binding at first with flysky as it has lots of binding settings, will post pic when home. Hope you get it sorted (ronnie42). Sbus setting i think on flysky? Wish the RX came with binding instructions.
-
- Private
- Posts: 60
- Joined: Wed Sep 09, 2020 2:29 pm
Re: Help connecting elmod pro on torro tank...
I attached all... thanks.
Im reading Manual Rad... trying to ignition the tank... but nothing happen.
The radio is paired, the red led on the receiver is not blinking. The blue led on the board is binding.
I do the procedure as shoed on manual but nothing happen.
Ps is normal that channel 1 and 2 are on the right stick?
Im reading Manual Rad... trying to ignition the tank... but nothing happen.
The radio is paired, the red led on the receiver is not blinking. The blue led on the board is binding.
I do the procedure as shoed on manual but nothing happen.
Ps is normal that channel 1 and 2 are on the right stick?
-
- Private
- Posts: 60
- Joined: Wed Sep 09, 2020 2:29 pm
Re: Help connecting elmod pro on torro tank...
Ronnie, i never saw a radio in mylife....lol so no.. im not sure i binded it correctly lol
well im sure is not correct cause it is not work
well im sure is not correct cause it is not work
-
- Private
- Posts: 60
- Joined: Wed Sep 09, 2020 2:29 pm
Re: Help connecting elmod pro on torro tank...
I think that the problem is here.
The tank doent see any receiver...
The tank doent see any receiver...
- Attachments
-
- 19869C38-A868-470B-B02E-E52E7E899668.jpeg (53.9 KiB) Viewed 3117 times
-
- Private
- Posts: 60
- Joined: Wed Sep 09, 2020 2:29 pm
Re: Help connecting elmod pro on torro tank...
ok guys
now the tank work. but still have some problems....
i mean,
the stick axix are wrong
on my radio if i move the stick up and down im operating channel 2
if i move right/left im operatin channel 1
how can i swap?
now the tank work. but still have some problems....
i mean,
the stick axix are wrong
on my radio if i move the stick up and down im operating channel 2
if i move right/left im operatin channel 1
how can i swap?