Elmod Bluetooth DIY module

Here is the place to talk about everything El-Mod! Help with installing and upgrading ect.
User avatar
wibblywobbly
Major
Posts: 6398
Joined: Fri Oct 17, 2008 9:30 am
Location: South Wales Valley
Contact:

Re: Elmod Bluetooth DIY module

Post by wibblywobbly »

The button that I have on mine is what pairs the module with a phone, it's making sure that the other wires are hooked up the correct places on the 5 pin plug that goes into the Elmod board that is theh challenge. Just need to make sure that the right signals are going down the right wires, to the right contacts at each end.

The module itself is unlikely to be anything special, I can't see Elmod re-inventing the wheel.

Another possibility is that the drivers that the Chinese board needs for cloned chips may be different to the genuine Bluetooth boards, I had this problem with the DasMikro sound boards, but when I got hold of the correct drivers they worked perfectly.
Tiger 1 Late
Panther G
King Tiger
M36 B1
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1979
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: Elmod Bluetooth DIY module

Post by Rad_Schuhart »

wibblywobbly wrote:The button that I have on mine is what pairs the module with a phone, it's making sure that the other wires are hooked up the correct places on the 5 pin plug that goes into the Elmod board that is theh challenge. Just need to make sure that the right signals are going down the right wires, to the right contacts at each end.

The module itself is unlikely to be anything special, I can't see Elmod re-inventing the wheel.

Another possibility is that the drivers that the Chinese board needs for cloned chips may be different to the genuine Bluetooth boards, I had this problem with the DasMikro sound boards, but when I got hold of the correct drivers they worked perfectly.
You are right, I dont think the Elmod reinvented anything...

Im 99% sure I wired the module correctly. Look I even took the same color wires (except the white, that is orange in the original module)
8a0b375e-327f-4e5a-8634-45b2fafc13b5.jpg
8a0b375e-327f-4e5a-8634-45b2fafc13b5.jpg (79.74 KiB) Viewed 3087 times
51aeebc6-7797-4023-bf02-5b8a69243607.jpg
51aeebc6-7797-4023-bf02-5b8a69243607.jpg (83.32 KiB) Viewed 3087 times
Also I tried infinite combinations and really, nothing happened, so it is safe.
What I think I am missing is that button, that also changes the baudrate.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
rochesb
Lance Corporal
Posts: 151
Joined: Sat Nov 11, 2017 7:21 pm
Location: Tyne and Wear, England

Re: Elmod Bluetooth DIY module

Post by rochesb »

Are you connecting a) Rx to Rx and Tx to Tx, or b) Rx to Tx & vice versa? It should be wired b)
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1979
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: Elmod Bluetooth DIY module

Post by Rad_Schuhart »

rochesb wrote:Are you connecting a) Rx to Rx and Tx to Tx, or b) Rx to Tx & vice versa? It should be wired b)
Hi. Usually all connections like this are RX to TX.
But due to it did not work, I tried both ways.

Still does not work, lol.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
rochesb
Lance Corporal
Posts: 151
Joined: Sat Nov 11, 2017 7:21 pm
Location: Tyne and Wear, England

Re: Elmod Bluetooth DIY module

Post by rochesb »

Are your boards HC05 or HC06? Do you get any LED indicators when you power the Bluetooth board? If so, is it steady or flashing, & if flashing what frequency/sequence do you see?
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1979
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: Elmod Bluetooth DIY module

Post by Rad_Schuhart »

rochesb wrote:Are your boards HC05 or HC06? Do you get any LED indicators when you power the Bluetooth board? If so, is it steady or flashing, & if flashing what frequency/sequence do you see?
I ordered an HC 05 that I installed in the radio.
Then I ordered the other one, that I think is HC 05 too, but came without the button, thats why I dont know exactly if it is HC 05 or HC 06.
At the beginning when I plugged it, it blinked very fast.
Then I bridged where the switch was supposed to be, and blinked way slower.

And I had no time to test anymore.
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
User avatar
Rad_Schuhart
Warrant Officer 1st Class
Posts: 1979
Joined: Tue Jan 19, 2016 9:22 am
Location: Spanish living in Graz, Austria. Heart in UK.
Contact:

Re: Elmod Bluetooth DIY module

Post by Rad_Schuhart »

Ok, I managed to install a small switch in the module. Not sure how to pair it, but the mobile phone finds it as an HC 05.

The elmod app finds it too, and with that name, but it wont connect...
My RC tanks website, loads of free info for everybody:
https://radindustries.wordpress.com/
User avatar
B_Man
Corporal
Posts: 480
Joined: Fri Apr 03, 2009 1:23 pm
Location: Yass, NSW, Australia

Re: Elmod Bluetooth DIY module

Post by B_Man »

I love threads like this. Keep fighting the good fight lads and there will be cheap bluetooth modules for all. :thumbup:
User avatar
43rdRecceReg
Major
Posts: 6295
Joined: Fri Jul 31, 2015 11:38 am
Location: North West Highlands, Scotland

Re: Elmod Bluetooth DIY module

Post by 43rdRecceReg »

B_Man wrote:I love threads like this. Keep fighting the good fight lads and there will be cheap bluetooth modules for all. :thumbup:
Ditto.. :thumbup:
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
rochesb
Lance Corporal
Posts: 151
Joined: Sat Nov 11, 2017 7:21 pm
Location: Tyne and Wear, England

Re: Elmod Bluetooth DIY module

Post by rochesb »

There's a lot of information about hooking up these bluetooth modules with standard Arduinio boards on the www. If I remember correctly HC05 can be master or slave, HC06 only slave. It would be interesting to see what happens if one of the Elmod bluetooth modules was connected to a native Arduinio board and 'interrogated'.

Also, I am wondering if the Elmod module is running customised firmware ?
Last edited by rochesb on Wed Feb 20, 2019 12:49 pm, edited 1 time in total.
Post Reply

Return to “El-Mod”