m113
m113
hi all, new here but looking for help.
Looking to make a m113 in 1/16 to start with. Looking for advice about tracks and wheels and drive spocket. Looking to make the wheels and drive sprockets to scale. Any help would be great
willhappy
Looking to make a m113 in 1/16 to start with. Looking for advice about tracks and wheels and drive spocket. Looking to make the wheels and drive sprockets to scale. Any help would be great
willhappy
-
- Recruit
- Posts: 43
- Joined: Sat Jul 24, 2010 10:42 pm
Re: m113
Hello!
In german there are diversed page for buy parts from M-113 but the three principal pages are AFV-Models.de and JT-scale-Militaermodellbau.de panzermodellbau peter muller
These are the page for some information contact me.
In german there are diversed page for buy parts from M-113 but the three principal pages are AFV-Models.de and JT-scale-Militaermodellbau.de panzermodellbau peter muller
These are the page for some information contact me.
Re: m113
Hi...
Here they got the M113, http://www.sonderfahrzeug-modellbau.com/" onclick="window.open(this.href);return false; both as kit and as finised model, but it cost a great amount of money...
If you find anything please post it, I am also in the market for a M113.
Here they got the M113, http://www.sonderfahrzeug-modellbau.com/" onclick="window.open(this.href);return false; both as kit and as finised model, but it cost a great amount of money...
If you find anything please post it, I am also in the market for a M113.
- Wizzard033
- Corporal
- Posts: 339
- Joined: Thu Sep 30, 2010 4:51 am
- Location: Lubbock, Texas
Re: m113
^^^
holy moly!
holy moly!
Re: m113
Hi Willhappy,
I am also scratch building an M113. To date body is coming along fine. I also will be looking for drive sprockets, road wheels and idlers so if you get yyours before I do please share location of supplier.
Do you have the measurements of the vehicle as yet? If not I will send same to you.
David.
I am also scratch building an M113. To date body is coming along fine. I also will be looking for drive sprockets, road wheels and idlers so if you get yyours before I do please share location of supplier.
Do you have the measurements of the vehicle as yet? If not I will send same to you.
David.
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7405
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: m113
Good Afternoon.
This is an M113 in 1:18 that came out a few years ago from 21st Century Toys. It is not the right scale and was inexpensive to boot to begin with but one of these might be helpful in some way if you can locate one online for sale. I modded mine slightly for appearance' sake.
regards,
Painless
This is an M113 in 1:18 that came out a few years ago from 21st Century Toys. It is not the right scale and was inexpensive to boot to begin with but one of these might be helpful in some way if you can locate one online for sale. I modded mine slightly for appearance' sake.
regards,
Painless
Last edited by PainlessWolf on Mon Jul 29, 2013 6:05 pm, edited 1 time in total.
...Here for the Dawn...
Re: m113
I detailed one of those 21st Century M113s too. Not bad for a pretty cheap "toy" but they're rare now so pricey. Build thread is below
http://www.rctankwarfare.co.uk/forums/v ... f=23&t=484
Ended up looking like this when I sold it to a forum member.
http://www.rctankwarfare.co.uk/forums/v ... f=23&t=484
Ended up looking like this when I sold it to a forum member.
You aint gettin me on no plane fool!
-
- Lance Corporal
- Posts: 102
- Joined: Fri Nov 25, 2011 3:35 am
Re: m113
I have one of those 21st Century ones still mounted to its base. I didn't realize how rare they were and how much they went up in price. I was going to use it to build a copy of one my 1st Sergeant used in Iraq with an RPG cage.
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7405
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: m113
Good Morning.
That's amazing work, Crispy! It makes me want to go tear all that stuff off of mine and simplify it's looks with some Olive Drab and basic stowage. *Adds to list of things to be done* One of these with a working suspension and plastic, pinned tracks would be too cool. (Are you listening, HengLong Guys?)
regards,
Painless Wolf
That's amazing work, Crispy! It makes me want to go tear all that stuff off of mine and simplify it's looks with some Olive Drab and basic stowage. *Adds to list of things to be done* One of these with a working suspension and plastic, pinned tracks would be too cool. (Are you listening, HengLong Guys?)
regards,
Painless Wolf
...Here for the Dawn...
-
- Recruit
- Posts: 7
- Joined: Sun Jan 05, 2014 6:20 pm
- Location: gladwin mi
Re: m113
I have the same static model want to know if anyone wants to build me a rc version be willing to to pay i can send my static model to whom ever wants to take on this project .