Leopard 2A6 rear mud ejection panels

This board is for talk about tanks after WW2. The ups and downs. The ins and outs. All of it here.
Post Reply
User avatar
Shootermcgraw
Private
Posts: 96
Joined: Sun Mar 17, 2019 3:30 pm
Location: U.S.A. Detroit, Michigan

Leopard 2A6 rear mud ejection panels

Post by Shootermcgraw »

This is a modification scratch build of the heng long plastic version upper Hull located at the rear of the tank.
After the complete upgrade of my leopard it weighed in at approximately 17 plus pounds, which churned up a lot of debris of sticks, grass, & dirt when making hard turns in both directions forward and backwards. I noticed it started binding up the sprocket and track. Right away it reminded me of a German field trial video of this tank demonstrating its maneuverability and firepower.
I noticed right away it showed these panels on a pivoting hinge which allowed mud and debris to be ejected from the area. So this is what I tried to replicate in my build.
IMG_20210704_201225583.jpg
IMG_20210704_201225583.jpg (38.66 KiB) Viewed 1214 times
IMG_20210704_201208223.jpg
IMG_20210704_201208223.jpg (45.4 KiB) Viewed 1214 times
IMG_20210704_201122764.jpg
IMG_20210704_201122764.jpg (42.57 KiB) Viewed 1214 times
IMG_20210704_201057411.jpg
IMG_20210704_201057411.jpg (40.25 KiB) Viewed 1214 times
IMG_20210702_050949447.jpg
IMG_20210702_050949447.jpg (56.5 KiB) Viewed 1214 times
IMG_20210702_050941191.jpg
IMG_20210702_050941191.jpg (53.64 KiB) Viewed 1214 times
IMG_20210701_173554145.jpg
IMG_20210701_173554145.jpg (47.28 KiB) Viewed 1214 times
IMG_20210701_173532549.jpg
IMG_20210701_173532549.jpg (36.71 KiB) Viewed 1214 times
IMG_20210630_160316368_HDR.jpg
IMG_20210630_160316368_HDR.jpg (31.05 KiB) Viewed 1214 times
IMG_20210628_191737872.jpg
IMG_20210628_191737872.jpg (33.82 KiB) Viewed 1214 times
Sent from my ONA19TB003 using Tapatalk
Last edited by Shootermcgraw on Sun Aug 01, 2021 10:23 pm, edited 1 time in total.

You can call me Will:
User avatar
Marco Peter
Sergeant
Posts: 717
Joined: Mon Jun 05, 2017 10:18 pm
Location: The Netherlands

Re: Leopard 2A6 rear mud ejection panels

Post by Marco Peter »

Once of the coolest mods I've seen so far! :-)

AND very useful no doubt!
1:16 was my scale. Until 'Konan' came into my life... an Armortek 1:6 Tiger 1!
... Now followed by a Panther G, 'Gunther'!

I'm a happy man. 8)
User avatar
Shootermcgraw
Private
Posts: 96
Joined: Sun Mar 17, 2019 3:30 pm
Location: U.S.A. Detroit, Michigan

Re: Leopard 2A6 rear mud ejection panels

Post by Shootermcgraw »

Marco Peter wrote:Once of the coolest mods I've seen so far! :-)

AND very useful no doubt!
Thank you Marco Peter Image

Sent from my ONA19TB003 using Tapatalk

You can call me Will:
User avatar
Son of a gun-ner
Lieutenant-Colonel
Posts: 6865
Joined: Sun May 07, 2017 8:49 pm
Location: Surrey UK

Re: Leopard 2A6 rear mud ejection panels

Post by Son of a gun-ner »

Yes, that is rather cool :thumbup: :clap:

How do you get them to stay up?
Mick - The grit in the underpants of life!
And always happy to spare the bytes

TOTM needs YOU :thumbup: support YOUR TOTM competition, I'm doing my part, are YOU?
User avatar
Shootermcgraw
Private
Posts: 96
Joined: Sun Mar 17, 2019 3:30 pm
Location: U.S.A. Detroit, Michigan

Re: Leopard 2A6 rear mud ejection panels

Post by Shootermcgraw »

Son of a gun-ner wrote:Yes, that is rather cool Image :clap:

How do you get them to stay up?
Thanks man, yes they didn't get lubricant till after I installed them. They would both get stuck at that position... just had to tap them down then they would swing freely. Took it out again for another field test and they definitely improved the ejection of debris that had binded up the tracks before. Major difference

Sent from my ONA19TB003 using Tapatalk

You can call me Will:
User avatar
Herr Dr. Professor
Lieutenant
Posts: 3456
Joined: Mon Apr 22, 2019 10:48 pm
Location: Southern Wisconsin USA

Re: Leopard 2A6 rear mud ejection panels

Post by Herr Dr. Professor »

Yeah! Such a little detail that creates a cool effect. Clever! :clap:
User avatar
Shootermcgraw
Private
Posts: 96
Joined: Sun Mar 17, 2019 3:30 pm
Location: U.S.A. Detroit, Michigan

Re: Leopard 2A6 rear mud ejection panels

Post by Shootermcgraw »

Thanks Dr. Professor, glad you like.

Sent from my ONA19TB003 using Tapatalk

You can call me Will:
Post Reply

Return to “Modern Tanks”