HengLong T-90 detail up
Posted: Thu Jun 07, 2018 4:14 am
Hello everyone.
I detailed up my HengLong T-90 tank.
I installed BEIER-Electronic 's sound board USM - HL 2, downloaded the actual T 90 tank sound from YouTube, and edited it using Audacity. The remodeling is as follows.
• Convert BB spec to barrel recoil and gun flash specification
• Gun flash of anti-aircraft machine gun on cupola using chip LED.
• 360 ° turret rotation using slip ring
• Added periscope
• IR Shtora, marker light, side marker light, added rear headlight on wind sensor pole, searchlight on turret, and brake light were remodelded to light up.
• Added rectifying fin board to engine exaust port
• Change the stock headlight guard to brass wire
• Detail up the back of commander cupora hatch
• Speaker exchange
•Removal of molded front fender fixing rod and making it by brass wire •Since the vertical space inside the tank is narrow, remove the battery box.
•Change upper and lower hulls to removable magnet type
I sprayed the surface primer of oxide red on a metal track, and sprayed AFV TRACK COLOR (No. 06) of MODEL KASTEN COLOR with an air brush. For expressing dust, I painted conte pastel shaving powder dissolved in PETROLE.
After attaching this track to the tank and running it several times, the painting of the contact surface of the track with the ground and wheels will peel off and become more realistic.
I detailed up my HengLong T-90 tank.
I installed BEIER-Electronic 's sound board USM - HL 2, downloaded the actual T 90 tank sound from YouTube, and edited it using Audacity. The remodeling is as follows.
• Convert BB spec to barrel recoil and gun flash specification
• Gun flash of anti-aircraft machine gun on cupola using chip LED.
• 360 ° turret rotation using slip ring
• Added periscope
• IR Shtora, marker light, side marker light, added rear headlight on wind sensor pole, searchlight on turret, and brake light were remodelded to light up.
• Added rectifying fin board to engine exaust port
• Change the stock headlight guard to brass wire
• Detail up the back of commander cupora hatch
• Speaker exchange
•Removal of molded front fender fixing rod and making it by brass wire •Since the vertical space inside the tank is narrow, remove the battery box.
•Change upper and lower hulls to removable magnet type
I sprayed the surface primer of oxide red on a metal track, and sprayed AFV TRACK COLOR (No. 06) of MODEL KASTEN COLOR with an air brush. For expressing dust, I painted conte pastel shaving powder dissolved in PETROLE.
After attaching this track to the tank and running it several times, the painting of the contact surface of the track with the ground and wheels will peel off and become more realistic.