HL Challenger 2 Design fault?

This board is for talk about tanks after WW2. The ups and downs. The ins and outs. All of it here.

Postby IV(AC) » Mon May 07, 2018 10:34 pm

Hi Folks, I'm just wondering if there's a design fault on the Heng Long Challenger 2's?

The reason I ask is I've now had two units delivered both with the track support rollers snapped off. Both were the pro version with metal Gearbox/track/drive wheels.

The seem easy enough to repair in that you can easily put a screw in from the inside, but when manually spinning the tracks they catch a LOT on the support rollers, especially the front and back ones (the middle ones are different....
Its possible that the metal tracks rip the top track support rollers off the chassis?

Steve
User avatar
IV(AC)
Recruit
 
Posts: 34
Joined: Sun Apr 08, 2018 10:08 pm
Location: Kent

Postby IV(AC) » Fri May 11, 2018 3:31 pm

No other Chally owners?
User avatar
IV(AC)
Recruit
 
Posts: 34
Joined: Sun Apr 08, 2018 10:08 pm
Location: Kent

Postby BarryC » Fri May 11, 2018 7:06 pm

I have one, metal version purchased at Christmas....arrived is fine order.

Barry
User avatar
BarryC
Warrant Officer 2nd Class
 
Posts: 1478
Joined: Sun Jan 03, 2016 12:43 pm
Location: Savannah, GA. USA

Postby spongehoobtank82 » Sat Jun 02, 2018 11:04 am

Not had a problem with mine but I only ran the plastic support rollers for a few hours before I took them off and replaced them with DKLM metal ones, they do seem quite fragile I guess
User avatar
spongehoobtank82
Sergeant
 
Posts: 516
Joined: Fri Aug 08, 2014 1:23 am

Postby Sub » Sun Jun 24, 2018 11:52 pm

Hi.
I have the pro edition version with the metal track / idler wheel and sprocket and gearboxes and other than the tracks being slightly slack ( which will be rectified by some scratch built auto tensioners ) and other scratch built modifications works fine with no issues.
Could it be the tracks being too slack and catching the rollers ? ?.
Regards
Sub.

Sub
Lance Corporal
 
Posts: 214
Joined: Wed Jul 22, 2009 10:45 am
Location: UK


Return to Modern Tanks

Who is online

Users browsing this forum: No registered users and 2 guests