Looking for leads on 1/16 Scale Leo 2 Display Ammo
-
- Recruit
- Posts: 9
- Joined: Sun Dec 19, 2021 7:51 pm
Looking for leads on 1/16 Scale Leo 2 Display Ammo
I want to get a few 1/16 scale shells for display with my Leopard 2 when finished.
Figured they can't be that hard to find. Found these beautiful ones at torro-shop.de: https://www.torro-shop.de/1-16-Accessor ... -2-DM12-A1
However they are 50 Euros to ship to the US! Anyone have any idea of a place I could find these that doesn't cost so much to ship? Was hoping to get at least one of each or at least one of the DM11, DM12 and DM33 rounds.
No luck anywhere else I have looked.
Figured they can't be that hard to find. Found these beautiful ones at torro-shop.de: https://www.torro-shop.de/1-16-Accessor ... -2-DM12-A1
However they are 50 Euros to ship to the US! Anyone have any idea of a place I could find these that doesn't cost so much to ship? Was hoping to get at least one of each or at least one of the DM11, DM12 and DM33 rounds.
No luck anywhere else I have looked.
- Shootermcgraw
- Private
- Posts: 96
- Joined: Sun Mar 17, 2019 3:30 pm
- Location: U.S.A. Detroit, Michigan
Re: Looking for leads on 1/16 Scale Leo 2 Display Ammo
I used a .22 Magnum shell, was perfect size for create...just have to do some refining to it. Might find cheaper at local gun shop?
Sent from my ONA19TB003 using Tapatalk
Sent from my ONA19TB003 using Tapatalk
You can call me Will:
Re: Looking for leads on 1/16 Scale Leo 2 Display Ammo
Can't say the price will be any better.
https://www.rctanklegion.com/collection ... 20mm-sabot
Barry
https://www.rctanklegion.com/collection ... 20mm-sabot
Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
Leonardo Da Vinci
Re: Looking for leads on 1/16 Scale Leo 2 Display Ammo
They're pretty much cylinders in various diameters combined... get me a good side view picture and at least one dimension (like the shell casing) and I can whip them up in Tinkercad...
Edit; Quick and dirty, based on a small .gif and the dimensions on the site you linked...
Edit; Quick and dirty, based on a small .gif and the dimensions on the site you linked...
Sherman M4A3/Stug III/Panzer III/Panzer IV/Tiger/King Tiger/KV-1/T34-85/Leopard 2A6/Abrams M1A2/Walker Bulldog/Pantiger
Under construction; Sherman Firefly IC - M3 Grant - Sherman BARV
... No, I do not have a problem....
Under construction; Sherman Firefly IC - M3 Grant - Sherman BARV
... No, I do not have a problem....
-
- Recruit
- Posts: 9
- Joined: Sun Dec 19, 2021 7:51 pm
Re: Looking for leads on 1/16 Scale Leo 2 Display Ammo
Rob1970, I'll keep that in mind thanks!
I also like the .22 cartridge that's neat. 17HMR would almost work.
I also like the .22 cartridge that's neat. 17HMR would almost work.
- tankme
- Warrant Officer 1st Class
- Posts: 1985
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: Looking for leads on 1/16 Scale Leo 2 Display Ammo
I actually bought the RCTankLegion versions and they are pretty nice as they are resin prints. I ordered them with a bunch of other stuff so I would feel the shipping bite so much. I really don't even want the sabot rounds. I just wanted the water proof transport cases to mount on my Abrams... Crews sometimes use the protective tubes to store stuff since they are water tight.
Derek
Too many project builds to list...
Too many project builds to list...
-
- Recruit
- Posts: 9
- Joined: Sun Dec 19, 2021 7:51 pm
Re: Looking for leads on 1/16 Scale Leo 2 Display Ammo
Yes those are the ones I would like to order, same cost of shipping to the US. However I have been in contact with https://www.torro-shop.de/ and they have kindly offered to ship a set of these three at less than the 50 euro international rate, a 10 euro international letter! Very nice of them.jhamm wrote:Hello,
RCTank.de have this: https://www.rctank.de/Leopard-2A6-Munit ... ht-in-1-16
https://www.rctank.de/Leopard-2A6-Munit ... ht-in-1-16
https://www.rctank.de/Leopard-2A6-Munit ... ht-in-1-16
Re: Looking for leads on 1/16 Scale Leo 2 Display Ammo
Just need to scale them down to 1/16... and print at least one at 1/1...
https://www.thingiverse.com/thing:4755479/files
https://www.thingiverse.com/thing:4755479/files
Sherman M4A3/Stug III/Panzer III/Panzer IV/Tiger/King Tiger/KV-1/T34-85/Leopard 2A6/Abrams M1A2/Walker Bulldog/Pantiger
Under construction; Sherman Firefly IC - M3 Grant - Sherman BARV
... No, I do not have a problem....
Under construction; Sherman Firefly IC - M3 Grant - Sherman BARV
... No, I do not have a problem....
-
- Recruit
- Posts: 9
- Joined: Sun Dec 19, 2021 7:51 pm
Re: Looking for leads on 1/16 Scale Leo 2 Display Ammo
The rounds arrived from Torro today. Thought I would share a couple photos i'm so happy with them! And yes it's still Christmas in my workshop somehow