Page 1 of 2
New switch for my tank
Posted: Mon Oct 21, 2019 5:10 pm
by desmo16
Hi guys, I replaced the original switch with this ... it works great.
Re: New switch for my tank
Posted: Mon Oct 21, 2019 5:45 pm
by jarndice
A link would be helpful for anyone interested in buying one of these switches.
Re: New switch for my tank
Posted: Mon Oct 21, 2019 5:57 pm
by desmo16
Switch Skyrc SK-600054. Taken online.
https://youtu.be/INX3F-Hh1Lc
Re: New switch for my tank
Posted: Mon Oct 21, 2019 6:21 pm
by Rad_Schuhart
- 74365340_1395387287278891_5268598822514196480_n.jpg (58.81 KiB) Viewed 3808 times
Re: New switch for my tank
Posted: Mon Oct 21, 2019 6:28 pm
by desmo16
[quote="desmo16"]Switch Skyrc SK-600054. Taken online.
Sorry... I don't know why you see anything else.
Re: New switch for my tank
Posted: Mon Oct 21, 2019 6:37 pm
by Black Knight
desmo16 wrote:Hi guys, I replaced the original switch with this ... it works great.
Looks good - got a link to show where to buy it from (not your youtube clip)???
Re: New switch for my tank
Posted: Mon Oct 21, 2019 8:42 pm
by 43rdRecceReg
The video link for the Youtube video didn't work, and your photo (when clicked to enlarge it) produced your photo, together with pics (ads) of outstanding Asian women on the Wirral
A direct link to the best source of the switch would, as others have suggested, be very helpful.
Re: New switch for my tank
Posted: Tue Oct 22, 2019 12:50 am
by desmo16
Re: New switch for my tank
Posted: Tue Oct 22, 2019 2:43 pm
by jarndice
If you type in "SKYRC 10 amp Power Switch" on ebay you will get a list of different vendors selling this item some Freepost and very much cheaper than others but all apparently the same.
Re: New switch for my tank
Posted: Tue Oct 22, 2019 7:04 pm
by 43rdRecceReg
- Skyrc power switch
- Skyrc power switch.jpg (16.81 KiB) Viewed 3703 times
This is the description from Amazon:
"...SKYRC introduces the POWER SWITCH, a tiny MCU controlled on/off switch for your radio controlled model.
A simple push button operates the switch meaning to eliminate the problems associated with intermittent contact of an ordinary mechanical switch.The sealed unit is plastic and can easily be mounted to the transponder mount of your model or anywhere else you can mount it using double sided tape. (Two kinds of bottom covers are included, user can change the bottom cover.)
The switch also features a LiPo mode, by turning this on, the switch unit will auto detect low LiPo voltage and cut off power to protect your LiPo from over dis-charging. This of course can be turned off if you have other safeguards in place or using NiMH/NiCad battery.
Additionally, the power switch informs you about the remaining capacity and condition of your battery pack..."