I'm still running plastic tracks on all my tanks. This hasn't been a problem for my Tigers, Pantiger or King Tiger, but it's a PITA for climbing or running on smooth floors for my Abrams or Bulldog. They slip around like they're on ice!
So I had a bright idea (for a change) and picked up a can of PLASTI-DIP, the stuff you can use to put rubbery handles on your hand tools. It cost me 8 bucks at for 14 ounces at the local home improvement store.
I used a foam paint brush and put 2 coats on the track pads of my Bulldog. It's easy to apply, just work slowly, 2 or 3 track pads at a time to get a nice coat without flooding the tracks. The PLASTI-DIP is thick enough that it goes where you put it, but thin enough that it flows to level. And it's flexible enough to stretch with each track segment. I applied each coat and allowed 30 minutes between coats according to the label.
So far it makes these once slippery tracks very grippy! It makes climbing steep objects possible and ends the fish-tailing on smooth surfaces. Time will tell how it holds up to wear and tear but so far so good! One can of this stuff could coat 100 tracks!
Another way to add 'rubber' pads to your tracks
Forum rules
This section is for posting helpful Tips and Tricks only. Questions need to be posted within general questions section viewforum.php?f=14
This section is for posting helpful Tips and Tricks only. Questions need to be posted within general questions section viewforum.php?f=14
-
- Recruit
- Posts: 38
- Joined: Sat Dec 15, 2018 7:52 pm
- Location: New Port Richey, FL
Another way to add 'rubber' pads to your tracks
Last edited by Jim Reeves on Mon Mar 25, 2019 12:22 am, edited 1 time in total.
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 6923
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: Another way to add 'rubber' pads to your tracks
Oh wow, that's awesome, thanks for sharing
Do you know if it'll also stick to the metal track links?
Edited: because I originally wrote plastic instead of metal
Do you know if it'll also stick to the metal track links?
Edited: because I originally wrote plastic instead of metal
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
- jarndice
- Colonel
- Posts: 8017
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Another way to add 'rubber' pads to your tracks
Plasti-Dip £17.80 for a 250Ml tin from E-Bay, Freepost.
I think I am about to upset someone
-
- Recruit
- Posts: 38
- Joined: Sat Dec 15, 2018 7:52 pm
- Location: New Port Richey, FL
Re: Another way to add 'rubber' pads to your tracks
It's sticking to my pre-painted track links so far, but I'll give it more time and see. Where I flooded the pin joints it just flexed with the bending and is easily cut away. I haven't tried it on unpainted plastic tracks (don't have any left), but I suspect it will be fine as long as the tracks are clean of oils before applying it. I've never prepped my tools before dipping and it's held up for years. If there is any issue with this I'll report back. This should be much easier with the rectangular pads on the Abrams.Son of a gun-ner wrote:Oh wow, that's awesome, thanks for sharing
Do you know if it'll also stick to the plastic track links?
A bonus of the application is using a small foam brush. After I was done I just squeezed the brush out on a paper towel and after curing the brush was as good as new!
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 6923
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: Another way to add 'rubber' pads to your tracks
Thank you. I may just get some and give it a try.
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
-
- Recruit
- Posts: 38
- Joined: Sat Dec 15, 2018 7:52 pm
- Location: New Port Richey, FL
Re: Another way to add 'rubber' pads to your tracks
This is much more than I would expect, is a equivalent product not available locally?jarndice wrote:Plasti-Dip £17.80 for a 250Ml tin from E-Bay, Freepost.
Re: Another way to add 'rubber' pads to your tracks
What an ingenious idea, never would have thought of it!!
But it’s a dry heat!
HL Panzer III
Taigen Tiger 1 Mid Metal edition
HL Panzer III
Taigen Tiger 1 Mid Metal edition
Re: Another way to add 'rubber' pads to your tracks
That looks great. I am stealing that idea.
-
- Recruit
- Posts: 9
- Joined: Wed Jul 15, 2020 2:09 pm
- Location: Lehi, Utah USA
- Contact:
Re: Another way to add 'rubber' pads to your tracks
I'm so glad I saw your idea. I was looking at buying the metal tracks with the rubber pads for my Leopard and I think I just saved $117. Great idea!!
Heng Long - Jagpanther Pro / Tiger I Pro / Panzer IV F Pro / Stug III 5.3 / King Tiger Premium / Leopard 2A6 Pro / Panther G / German Panther / KV-1 Pro / T-34/85 / T-72 / Challenger II / M41 Pro / M4A2 / M1A1 / M26 5.3