Fixing Aber , Voyager or homemade brass side skirts

This section contains tips and tricks on building and running model vehicles. If you know any then post them here and if you need to find any, try your first search here.
Forum rules
This section is for posting helpful Tips and Tricks only. Questions need to be posted within general questions section viewforum.php?f=14
Post Reply
ronnie42
Staff Sergeant
Posts: 834
Joined: Sun Feb 04, 2018 11:00 am

Fixing Aber , Voyager or homemade brass side skirts

Post by ronnie42 »

P4054924 (1).jpg
P4054923.jpg
P4054925.jpg
Thought it was a pain getting 16 tiny bolts holes in correct position. The brass bolts are prone to shearing when tightened up.
Easy way solder 2 copper wires ( 2.5 electrical cable is a perfect fit with a 4mm nut it cuts a nice thread as you screw down the nut . Good for ripped and bent skirts, only 8 holes per side and just glue on some bolt heads . A slight bigger hole and a washer give some adjustment and unlikely to fall off. Will use to fix mudguards as well.
Post Reply

Return to “Tips and Tricks”