Sherman firefly Hybrid finished!

Here is where you can show off your finished tanks and military vehicles, post pics and info on your arsenal!
Forum rules
If you're planning on posting a log of your build please use the relevant build sections.
User avatar
dgsselkirk
Warrant Officer 2nd Class
Posts: 1484
Joined: Tue Oct 16, 2012 1:57 am
Location: Kitchener, Ontario, Canada
Contact:

Sherman firefly Hybrid finished!

Post by dgsselkirk »

Firefly #1 done! This is a hybrid Firefly with full metal Mato bottom and combination plastic Mato M4A1 front combined with HengLong M4A3 back end. Runs on a TK60S sbus with my custom firefly sounds. Has most of the bells and whistles you can do. Stowage is one of my kits except for the wine bottles. Those are scratch built. Internals done by Big Mike from the Club. Meant to represent Canadian 5th Armoured late spring 45. This one will be headed to market shortly...

https://www.youtube.com/watch?v=OnJwAbp ... =DeanGodin
"There are things in Russia which are not as they seem..."
Georgy Konstantinovich Zhukov
User avatar
Kaczor
Warrant Officer 1st Class
Posts: 1769
Joined: Fri May 18, 2018 9:58 am
Location: Ciechanow, Poland
Contact:

Re: Sherman firefly Hybrid finished!

Post by Kaczor »

phpBB [video]
Nice job with hybrid hull :)
Last edited by Kaczor on Wed May 05, 2021 1:13 pm, edited 2 times in total.
User avatar
square4
Lance Corporal
Posts: 205
Joined: Thu Jun 21, 2018 11:45 am
Location: Southport

Re: Sherman firefly Hybrid finished!

Post by square4 »

Very nice and smooth turret traverse. :clap:
I never finish anyth
User avatar
BarryC
2nd Lieutenant
Posts: 2468
Joined: Sun Jan 03, 2016 11:43 am
Location: Savannah, GA. USA

Re: Sherman firefly Hybrid finished!

Post by BarryC »

Super nice Dean! :thumbup: :thumbup:

The conversion is fantastic and you've mastered the art of stowage, really dresses out a beautiful build. 8)

I suspect the TC is going to need a cup refill after the recoil from the shot!! :D

Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
User avatar
dgsselkirk
Warrant Officer 2nd Class
Posts: 1484
Joined: Tue Oct 16, 2012 1:57 am
Location: Kitchener, Ontario, Canada
Contact:

Re: Sherman firefly Hybrid finished!

Post by dgsselkirk »

Thanks for the kind words guys... I am going to do some video on the weekend at our battleday...
"There are things in Russia which are not as they seem..."
Georgy Konstantinovich Zhukov
User avatar
43rdRecceReg
Major
Posts: 6294
Joined: Fri Jul 31, 2015 11:38 am
Location: North West Highlands, Scotland

Re: Sherman firefly Hybrid finished!

Post by 43rdRecceReg »

A real looker, Dean :clap: It's a good thing you chose the Hybrid Firefly as your subject, because sawing that Mato metal lower into three, to get the M4A4 length, would be a real nightmare. 8O
Very tastefully done throughout... and that barrel flash looks fearsome too :D
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
User avatar
c.rainford73
Major
Posts: 6104
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Re: Sherman firefly Hybrid finished!

Post by c.rainford73 »

What a beauty Dean! :clap: absolutely fantastic and realistic :wave:

Let me know when its off to market after you enjoy it its stunning :clap: :clap:
Tanks alot.... :wave:
User avatar
dgsselkirk
Warrant Officer 2nd Class
Posts: 1484
Joined: Tue Oct 16, 2012 1:57 am
Location: Kitchener, Ontario, Canada
Contact:

Re: Sherman firefly Hybrid finished!

Post by dgsselkirk »

square4 wrote:Very nice and smooth turret traverse. :clap:
I use a 2 ohm resister to slow the turret down. It also helps protect the Clark board... :-)
"There are things in Russia which are not as they seem..."
Georgy Konstantinovich Zhukov
User avatar
dgsselkirk
Warrant Officer 2nd Class
Posts: 1484
Joined: Tue Oct 16, 2012 1:57 am
Location: Kitchener, Ontario, Canada
Contact:

Re: Sherman firefly Hybrid finished!

Post by dgsselkirk »

43rdRecceReg wrote:A real looker, Dean :clap: It's a good thing you chose the Hybrid Firefly as your subject, because sawing that Mato metal lower into three, to get the M4A4 length, would be a real nightmare. 8O
Very tastefully done throughout... and that barrel flash looks fearsome too :D
Yea, no did not even entertain the thought of doing that! LOL!
"There are things in Russia which are not as they seem..."
Georgy Konstantinovich Zhukov
User avatar
dgsselkirk
Warrant Officer 2nd Class
Posts: 1484
Joined: Tue Oct 16, 2012 1:57 am
Location: Kitchener, Ontario, Canada
Contact:

Re: Sherman firefly Hybrid finished!

Post by dgsselkirk »

[quote="c.rainford73"]What a beauty Dean! :clap: absolutely fantastic and realistic :wave:

Let me know when its off to market after you enjoy it its stunning :clap: :clap:[

Will do Carl... :)
"There are things in Russia which are not as they seem..."
Georgy Konstantinovich Zhukov
Post Reply

Return to “Show Off”