Hemmt P802 c/w Crane
Forum rules
If you're planning on posting a log of your build please use the relevant build sections.
If you're planning on posting a log of your build please use the relevant build sections.
-
- Recruit
- Posts: 33
- Joined: Sat Jul 02, 2016 11:03 pm
- Location: Warrington, Cheshire
Hemmt P802 c/w Crane
Hi All, just thought i'd post a couple of piccies of my P802 Hemmt c/w crane just finished air brushing the camouflage so no now the clean up of over spray & put the accessories back on next project its trailer......IT'S GONNA BE HUGE!!!
Challenger 2 Pete
- PershingLover
- Corporal
- Posts: 309
- Joined: Thu Dec 05, 2019 11:37 pm
- Location: Sweden
Re: Hemmt P802 c/w Crane
Wow, that is massive! Looks great, too!
- jarndice
- Colonel
- Posts: 8023
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Hemmt P802 c/w Crane
Hi Pete I have a HEMMT P803A (Tipper) They are really great trucks, just about every bell and whistle comes as standard including working indicators and boy are they big,
I do like the toolkit and carry case that comes with it.And almost everything is screwed or bolted in place, Hardly any glue being used so that armed with the very detailed handbooks and the provided toolkit taking it apart is a doddle.
I do like the toolkit and carry case that comes with it.And almost everything is screwed or bolted in place, Hardly any glue being used so that armed with the very detailed handbooks and the provided toolkit taking it apart is a doddle.
I think I am about to upset someone
-
- Recruit
- Posts: 33
- Joined: Sat Jul 02, 2016 11:03 pm
- Location: Warrington, Cheshire
Re: Hemmt P802 c/w Crane
Hi Jarndice I quite agree loved the tipper one would love to have all the variations as I believe you can get a missle trailer that fires & also a radar tracking station, yes they are very big & well worth the money, only downside ive found is the sound cuts out after about 15 secs if you don't move unless someone knows how to change this so it stays on permanently???
Challenger 2 Pete
-
- Recruit
- Posts: 33
- Joined: Sat Jul 02, 2016 11:03 pm
- Location: Warrington, Cheshire
- wibblywobbly
- Major
- Posts: 6398
- Joined: Fri Oct 17, 2008 9:30 am
- Location: South Wales Valley
- Contact:
Re: Hemmt P802 c/w Crane
I bought one a while back, and did a fair bit of work on it. Locked all of the diffs with epoxy, fitted 1.9" wheels and 120mm tyres to increase the ground clearance. Made my own non working crane and a few other bits. Fitted more powerful steering servo's. Made a driver out of a Heng Long character. Removed the top of the battery tray for easy access, with a magnetic load deck. Das Mikro Sound system installed. Fitted a better motor (pain in the neck getting at it). Removed the cab roof light. Repainted it green, it was desert camo before. I run it on a 3 channel trigger rx as it makes life easier.
It now climbs like a mountain goat, and rides over rough ground without the diffs catching on everything. Nice trucks, but weigh a ton, a 5000mah 3S lipo drains in an hour or less, so always have to take two with me so that I don't have to carry it back to the car, lol.
It now climbs like a mountain goat, and rides over rough ground without the diffs catching on everything. Nice trucks, but weigh a ton, a 5000mah 3S lipo drains in an hour or less, so always have to take two with me so that I don't have to carry it back to the car, lol.
Tiger 1 Late
Panther G
King Tiger
M36 B1
Panther G
King Tiger
M36 B1
- jarndice
- Colonel
- Posts: 8023
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Hemmt P802 c/w Crane
The HEMMT P803A comes with its own 16 channel digital Proportional Radio Transmitter and it is a Beut.
I really like how under the Bodywork the truck is all metal.
When I was buying it I wondered if I was wasting my money and then it arrived and any doubts disappeared,It really is well worth it.
I really like how under the Bodywork the truck is all metal.
When I was buying it I wondered if I was wasting my money and then it arrived and any doubts disappeared,It really is well worth it.
I think I am about to upset someone
Re: Hemmt P802 c/w Crane
Hi Have you modified the crane extension ,seen it on youtube its very slow. The only thing i have seen about this model i dont like just wonder if there is a mod to make it faster.
regards pete
regards pete
- Shootermcgraw
- Private
- Posts: 96
- Joined: Sun Mar 17, 2019 3:30 pm
- Location: U.S.A. Detroit, Michigan
Re: Hemmt P802 c/w Crane
Nice job on the camo.... I was wondering what scale this is and is it proportional to trailer a 1/16 scale Tank?
You can call me Will: