3D printable Cromwell Mk. IV in scale 1/16

This section is for builds that are not strictly Tamiya or Heng Long. For instance, replacing the electronics from a WSN or Matorro, or even a scratch-build.
Locb13
Recruit
Posts: 37
Joined: Mon Aug 28, 2017 11:59 am
Location: Moscow, Russia

Re: 3D printable Cromwell Mk. IV in scale 1/16

Post by Locb13 »

this is an amazing job!!!!! tell me, will Armata sell files for printing? I would like to!
User avatar
Raminator
Warrant Officer 2nd Class
Posts: 1266
Joined: Tue Aug 11, 2015 9:57 am
Location: Newcastle, Australia

Re: 3D printable Cromwell Mk. IV in scale 1/16

Post by Raminator »

Congratulations on the release Tomáš, it looks like I'm going to have to invest in a bigger printer. ;)
Exhibitedbrute
Warrant Officer 2nd Class
Posts: 1303
Joined: Tue Dec 17, 2019 12:27 am

Re: 3D printable Cromwell Mk. IV in scale 1/16

Post by Exhibitedbrute »

As it stands my printer doesn’t work but I will definatly be buying, and likely offload my Ludwig one somewhere
It’s your tank it’s what you make it
Exhibitedbrute
Warrant Officer 2nd Class
Posts: 1303
Joined: Tue Dec 17, 2019 12:27 am

Re: 3D printable Cromwell Mk. IV in scale 1/16

Post by Exhibitedbrute »

How much was the kit I forget
It’s your tank it’s what you make it
User avatar
midlife306
Warrant Officer 1st Class
Posts: 2238
Joined: Sun Aug 27, 2017 10:34 am

Re: 3D printable Cromwell Mk. IV in scale 1/16

Post by midlife306 »

Exhibitedbrute wrote:How much was the kit I forget
Post 67


Sent from my iPhone using Tapatalk
Exhibitedbrute
Warrant Officer 2nd Class
Posts: 1303
Joined: Tue Dec 17, 2019 12:27 am

Re: 3D printable Cromwell Mk. IV in scale 1/16

Post by Exhibitedbrute »

[quote="50koruny"]I am still not sure about that.
Maybe you could help me a little.
I need to do some short survey about that.

I missed this originally but I maybe able to help with dimensions and photos as I have one of ludwigs and his are usually quite accurate for scale
It’s your tank it’s what you make it
User avatar
Rob1970
Corporal
Posts: 334
Joined: Sat Jul 17, 2021 6:47 pm

Re: 3D printable Cromwell Mk. IV in scale 1/16

Post by Rob1970 »

For your next project I'd consider a Churchill. With the number of cool variants (AVRE, Crocodile, Bridge Layer version...) you'd sell one at least. ;D Bonus if you do the fuel trailer for the Crocodile...
Sherman M4A3/Stug III/Panzer III/Panzer IV/Tiger/King Tiger/KV-1/T34-85/Leopard 2A6/Abrams M1A2/Walker Bulldog/Pantiger
Under construction; Sherman Firefly IC - M3 Grant - Sherman BARV
... No, I do not have a problem....
User avatar
50koruny
Lance Corporal
Posts: 228
Joined: Mon Sep 04, 2017 6:49 pm
Location: Hungary
Contact:

Re: 3D printable Cromwell Mk. IV in scale 1/16

Post by 50koruny »

Exhibitedbrute wrote:How much was the kit I forget
Thank you for the interest.About 500€.Still not 100% estabilished.I'm stuck in some other job and my primary 3D printer for Cromwell was broken for few days, so first kit is still not completed.
When i do this first kit, i will estabilish some price finally.
Exhibitedbrute wrote:
50koruny wrote:I am still not sure about that.
Maybe you could help me a little.
I need to do some short survey about that.

I missed this originally but I maybe able to help with dimensions and photos as I have one of ludwigs and his are usually quite accurate for scale
Thank you, but what are those dimensions for?
Locb13 wrote:this is an amazing job!!!!! tell me, will Armata sell files for printing? I would like to!
Thank you.Honestly, i'm not doing anything about it.Situation about intellectual property and licensing is very difficult.
It's stuck and I have to dedicate energy to new projects without these problems.
Raminator wrote:Congratulations on the release Tomáš, it looks like I'm going to have to invest in a bigger printer. ;)
Thank you.
Unfortunately, you don't need a bigger printer. :)
Its printable even with 220x220mm Ender 3.
Rob1970 wrote:For your next project I'd consider a Churchill. With the number of cool variants (AVRE, Crocodile, Bridge Layer version...) you'd sell one at least. ;D Bonus if you do the fuel trailer for the Crocodile...
Lot of votes for the Churchill, but i dont think i can design that tensioner wheels and road wheels to be printable and durable.
Same with the suspensions system.
I am avoiding Churchill because of this.I dont think i can make Churchill with some reasonable durability.
Maybe in few years.Technology is growing fast.
43rdRecceReg wrote:This is a masterclass in research and development. :clap: :clap:
What's more, the tank behaves wonderfully (especially the suspension) in the Youtube proving trial. That's the reward for careful planning. :clap:
If I didn't already have a Cromwell, I'd find this very hard to resist. :)
Thank you very much.I still strive for the highest possible quality.The development takes a long time, but is extensive.
I think its worth of that.
facebook.com/warprints
User avatar
50koruny
Lance Corporal
Posts: 228
Joined: Mon Sep 04, 2017 6:49 pm
Location: Hungary
Contact:

Re: 3D printable Cromwell Mk. IV in scale 1/16

Post by 50koruny »

First kit is finally available.Preparing next one.
facebook.com/warprints
Post Reply

Return to “Other Builds”