Ok so i wanted to finish off a model i had thought about for a while, so last week i modelled the 95% of the model from when i last thought about it a while back.
First test prototype printed today and ok its not perfect, but i am really happy with it
So over the next coming weeks i will fettle it and get it sorted so can make more sturdy.
Then my list of things gets smaller, Autoart police cars 1/24, Willys Jeep, DUKW, Schwimmwagen, Panther parts, some more artillery and fun things
1st Prototype printed
Quick video run down of the little working features
There is a bit more work to do on the shield as i want it to fold like it should, but being soo small its going to be tricky not to lose detail for being robust with working hinges.
The tyres will help bring this little thing alive aswell.
Because of the size of this thing, a 1/6 version will be along soon
1/16 WCP RC Models Pak36 Towable & Poseable
- Will01Capri
- 2nd Lieutenant
- Posts: 2704
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
1/16 WCP RC Models Pak36 Towable & Poseable
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: 1/16 WCP RC Models Pak36 Towable & Poseable
Most excellent addition to any 1/16 (or 1/6) battlefield
Tanks alot....
- Will01Capri
- 2nd Lieutenant
- Posts: 2704
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
Re: 1/16 WCP RC Models Pak36 Towable & Poseable
Some pictures of the badly painted (by me) 1st Prototype Pak36
Still loads to do, but its getting there nicely
We are busy printing 2 of these in 1/6 also
The tyres are just temporary until we get that better sorted.
Next ones to print will feature higher res printing for smoother finish and the shields will need to be adjusted to close the gaps slightly.
The track width has already been narrowed as the springs used for suspension made it a little too wide. But i am really happy with it
Still loads to do, but its getting there nicely
We are busy printing 2 of these in 1/6 also
The tyres are just temporary until we get that better sorted.
Next ones to print will feature higher res printing for smoother finish and the shields will need to be adjusted to close the gaps slightly.
The track width has already been narrowed as the springs used for suspension made it a little too wide. But i am really happy with it
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
- jarndice
- Colonel
- Posts: 8003
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: 1/16 WCP RC Models Pak36 Towable & Poseable
Just a thought if you print the upper part of the lower shield thicker and the lower part of the upper shield thicker then perhaps something like this might do the job-----
www.dollshouse.com/brass-hinges
Ref DIY 672 £3.86
www.dollshouse.com/brass-hinges
Ref DIY 672 £3.86
I think I am about to upset someone
- Will01Capri
- 2nd Lieutenant
- Posts: 2704
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
Re: 1/16 WCP RC Models Pak36 Towable & Poseable
Good idea. The lower shield between the wheels folds up and down already by doing exactly that. So it can fold up for transport. I am working on some options for the top shield. I have designed some micro hinges which use 0.8mm wire. But not got there yet. But I do plan on having the ability to fold them down. Up until now I just have cut the shield so i can glue in up or down position.jarndice wrote:Just a thought if you print the upper part of the lower shield thicker and the lower part of the upper shield thicker then perhaps something like this might do the job-----
http://www.dollshouse.com/brass-hinges
Ref DIY 672 £3.86
I have those hinges already, but they are huge for the scale haha. I keep my fingers crossed.
I will say the 1/6 version is alot easier hahahaha
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!