Comet A34- Ludwig kit
Re: Comet A34- Ludwig kit
Looking more like a comet now!
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Comet A34- Ludwig kit
Thanks, Adam! Yes, when the main components are put together, it does begin to resemble a Comet. But what amazes me is, even after all the headscratching, solution finding, and heady cement fumes, ...there's still a huge amount of time needed to get that satisfying authentic look.Ad Lav wrote:Looking more like a comet now!
The Comet looks quite deceptively uncomplicated compared with modern tanks, with a plainer appearance; but the harder one looks, the more there is to add to the build. The turret alone still needs: aerials, a gunsight, a 2in smoke shell discharger, loading hatch handles (with splash guard... ) and...well, you get the idea.
It's tempting to miss some details out- but the inner nerd whinges, and moans, until that annoying, tell-tale, blank space is filled by the appropriate part.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Comet A34- Ludwig kit
A little update. I have a brace of metal fire extinguishers to fit to the turret. As they're quite weighty, they need pins, as well as epoxy, to keep them securely in place.
A wee bit of drilling with my trusty pin vice. (Click to ENLARGE pics...) I chopped up some paper clips, and embedded them in the extinguishers with JB Weld (metal) Epoxy. I've found it works very well on alloys and white metals. The Brit pattern extinguishers came from Christian Ludwig, by the way.
A wee bit of drilling with my trusty pin vice. (Click to ENLARGE pics...) I chopped up some paper clips, and embedded them in the extinguishers with JB Weld (metal) Epoxy. I've found it works very well on alloys and white metals. The Brit pattern extinguishers came from Christian Ludwig, by the way.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Comet A34- Ludwig kit
The Comet Turret also has a 2in Bomb Thrower No 1 unit near the Loader's hatch. The unit is based on the British 2 in mortar, but its range has been limited to 150 yrds, partly because of the short barrel. It was used for close defence situations, and for firing smoke shells.
You can see it highlighted in this pic: Then I added some Meng nuts to the base. meng nuts are resin based, I think, but I stuck them on with ordinary Revell Pro cement. They shouldn't stick, but they appear to. I didn't want to use superglue as it doesn't work that well with styrene, and mixing up 2-part Plastic Fusion epoxy seemed like overkill for four wee nuts. I'm just hoping they don't fall off. However, I did a test yesterday bonding a 2mm meng Nut to a piece of styrene sheet, just using Revell Contacta Pro and I couldn't prise it off. So... Fitted in situ, it looks like this (do bear in mind that all these parts will be cleaned up, prior to painting):
I'm, duplicating some of these pics, because they're apt to disappear after a while, if posted from Imgur... I've seen one or two threads lately (Estniche's Tiger 1 build, for example) where most of the pics have simply vanished into the ether. You'll also see I've added a defensive strap in front of the Loader's Hatch, and begun the process of making my own (openable) hinges from scratch, as there's no online source for WW2 Brit Tank hinges
German hinges-yes. Brit hinges -no. Doll's house hinges just don't look right. Someday, I'll go back and correct the ones I fitted to my Cromwell.
You can see it highlighted in this pic: Then I added some Meng nuts to the base. meng nuts are resin based, I think, but I stuck them on with ordinary Revell Pro cement. They shouldn't stick, but they appear to. I didn't want to use superglue as it doesn't work that well with styrene, and mixing up 2-part Plastic Fusion epoxy seemed like overkill for four wee nuts. I'm just hoping they don't fall off. However, I did a test yesterday bonding a 2mm meng Nut to a piece of styrene sheet, just using Revell Contacta Pro and I couldn't prise it off. So... Fitted in situ, it looks like this (do bear in mind that all these parts will be cleaned up, prior to painting):
I'm, duplicating some of these pics, because they're apt to disappear after a while, if posted from Imgur... I've seen one or two threads lately (Estniche's Tiger 1 build, for example) where most of the pics have simply vanished into the ether. You'll also see I've added a defensive strap in front of the Loader's Hatch, and begun the process of making my own (openable) hinges from scratch, as there's no online source for WW2 Brit Tank hinges
German hinges-yes. Brit hinges -no. Doll's house hinges just don't look right. Someday, I'll go back and correct the ones I fitted to my Cromwell.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Comet A34- Ludwig kit
This illustration, posted earlier, shows the Loader's hatch fitted with two 'splash' defensive strips. The second one-straddling the hinge on the foremost hatch door, has bullet holes in it from field trials. On production models, I think this second strip was omitted. In any event, I've only fitted the frontal strip.
Last edited by 43rdRecceReg on Thu Jun 27, 2019 12:50 am, edited 1 time in total.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: Comet A34- Ludwig kit
Superb job! Love the details and will continue to follow your progress. You are doing a great job
Tanks alot....
Re: Comet A34- Ludwig kit
Good detailing going on here
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Comet A34- Ludwig kit
Thanks, lads!
Looking online, it's possible to find usable hinges for WW2 German tanks, at Shapeways, Asiatam and elsewhere. Sadly, but unsurprisingly, this isn't the case with WW2 British armour- at least not in 1/16 scale, anyway.
So, this is how I made some. I used blueprints as a rough guide to their dimensions and shapes. Even finding online pictures (especially desirable closeups) of turret, and engine deck, hinges is a frustrating process.
First, I picked some junked 1mm styrene, and scored an edge away, to increase the area needed to bond tube to. The tube in question has an O.D. of 2.5mm, and an I.D (Inside diameter) of 1mm Then I bonded the tube to it: ..and then marked out some rough divisions. I need six hinges altogether. That's four for the Loader's Hatch, and two for the Engine Deck hatch.
Looking online, it's possible to find usable hinges for WW2 German tanks, at Shapeways, Asiatam and elsewhere. Sadly, but unsurprisingly, this isn't the case with WW2 British armour- at least not in 1/16 scale, anyway.
So, this is how I made some. I used blueprints as a rough guide to their dimensions and shapes. Even finding online pictures (especially desirable closeups) of turret, and engine deck, hinges is a frustrating process.
First, I picked some junked 1mm styrene, and scored an edge away, to increase the area needed to bond tube to. The tube in question has an O.D. of 2.5mm, and an I.D (Inside diameter) of 1mm Then I bonded the tube to it: ..and then marked out some rough divisions. I need six hinges altogether. That's four for the Loader's Hatch, and two for the Engine Deck hatch.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Comet A34- Ludwig kit
Don't forget to click on these images to ENLARGE them; that way you'll see more detail.
I've also fitted one of the Shapeway door latches to the MG gunner's door. The catch for the Driver's escape hatch was broken, and so i'll have to get the Cromwell set again. Most of which will actually go on my Cromwell...eventually.
and hinges fitted to Engine deck hatch. Ultimately, this will mean that the Commander's and Loader's hatches will be openable. The storage bins and the engine deck hatch will also open.
A little factoid, the Comet was the first British made tank to be equipped with a travel lock for the barrel. I've also fitted one of the Shapeway door latches to the MG gunner's door. The catch for the Driver's escape hatch was broken, and so i'll have to get the Cromwell set again. Most of which will actually go on my Cromwell...eventually.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Comet A34- Ludwig kit
I've had a lot of chores lately, and so the build has stalled slightly. In the meantime, while I turn my attention to the return rollers, here's a really good walkaround (and internal peek-around) of a newly restored Comet. This one has the split Normandy Cowl I have fitted to my model, and practically all the features I'd like on mine. I'd say the interior is every bit as well laid out, and well-engineered, as it would be by the Teutonic cousins of the English- The Germans. It even has comfortable seats, according to the Dutch reviewer. In any event, the restoration is impeccable.
The video is nice and crisp, which makes it ideal for screenshots for my project. The only downside, for me, is that the reviewer must have learned his English from some 'Uptalking' American 'Valley Girls'. 'Valley Girls' have adopted that annoying affected tendency of ending every statement, and phrase, with an upward flourish, ('Australian Upward Inflection') so that it sounds like a question , or a bad case of hiccups.
Anyway, do watch:
Then there's this account of a scrap between some Tiger 1s, and Some Comets. It finished with one 'kill' apiece. Overall, there's not much info to be had on tank encounters of this type.
The video is nice and crisp, which makes it ideal for screenshots for my project. The only downside, for me, is that the reviewer must have learned his English from some 'Uptalking' American 'Valley Girls'. 'Valley Girls' have adopted that annoying affected tendency of ending every statement, and phrase, with an upward flourish, ('Australian Upward Inflection') so that it sounds like a question , or a bad case of hiccups.
Anyway, do watch:
Then there's this account of a scrap between some Tiger 1s, and Some Comets. It finished with one 'kill' apiece. Overall, there's not much info to be had on tank encounters of this type.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.