Gig's 1:16 FCM F1
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: Gig's 1:16 FCM F1
Congratulations Gig
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- silversurfer1947
- Lieutenant
- Posts: 3338
- Joined: Tue Oct 27, 2015 9:54 pm
- Location: Bristol, UK
Re: Gig's 1:16 FCM F1
Well done. However, the video does not appear. It says it has either been removed from Facebook or is not visible due to privacy settings.
Richard
Tamiya Tiger 1, Taigen FlakPanzer IV,Torro M16 half-track, Tamiya Panther,WSN/Torro T34,Taigen M41 Bulldog,H/l/Taigen Sherman M4A3,H/L T90, Haya M3 Grant, Metal Origins 234/2 Puma, Nashorn by Alwyn. I was only going to have one tank - honest!
Tamiya Tiger 1, Taigen FlakPanzer IV,Torro M16 half-track, Tamiya Panther,WSN/Torro T34,Taigen M41 Bulldog,H/l/Taigen Sherman M4A3,H/L T90, Haya M3 Grant, Metal Origins 234/2 Puma, Nashorn by Alwyn. I was only going to have one tank - honest!
Re: Gig's 1:16 FCM F1
uploaded to youtube
for 4 years after on and off projects for better equipment and designs.
shoved in a heng long 6.0 and a mato 5:1 gearbox and i couldnt believe my eyes she runs smoothly. almost.. disregard for the roof falling apart, after all she is still a work in progress.
for 4 years after on and off projects for better equipment and designs.
shoved in a heng long 6.0 and a mato 5:1 gearbox and i couldnt believe my eyes she runs smoothly. almost.. disregard for the roof falling apart, after all she is still a work in progress.
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
Re: Gig's 1:16 FCM F1
It is the first FCM f1 RC that I see running on his own tracks It is a big job, congratulations!!!
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Gig's 1:16 FCM F1
Really well done!.
I can imagine how satisfying it must be to see your design up and running. Just remember to tape the loose parts down, before you come to the next steep bridge!
I can imagine how satisfying it must be to see your design up and running. Just remember to tape the loose parts down, before you come to the next steep bridge!
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: Gig's 1:16 FCM F1
And there’s me thinking it was due to a direct hit from a Tiger 1 lol
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Gig's 1:16 FCM F1
will need to refine more on the tracks and pins. some of the glue got caught on the return gliders and tracks got wedge in due to the pins being too long
id say this is good hull evaluation and will refine further
id say this is good hull evaluation and will refine further
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
Re: Gig's 1:16 FCM F1
the best kind of satisfaction, no other place you can get that hahahaha43rdRecceReg wrote: Really well done!.
I can imagine how satisfying it must be to see your design up and running. Just remember to tape the loose parts down, before you come to the next steep bridge!
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
Re: Gig's 1:16 FCM F1
after some tests and adjustments and a field repair of a cracked hull side.
i have a conclusion to redesign the wheels and probably another set of better looking tracks and its trailing wheels for better track engagement and keeping it inline.
the field repair was done on the screw mount where it connected the hull and the track housing. will add more screws to the tensioner housing as well for better rigidity.
hull construction will consist of dove tail connections.
i have a conclusion to redesign the wheels and probably another set of better looking tracks and its trailing wheels for better track engagement and keeping it inline.
the field repair was done on the screw mount where it connected the hull and the track housing. will add more screws to the tensioner housing as well for better rigidity.
hull construction will consist of dove tail connections.
Heng Long tanks:
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
KV-1E
KV-2 MT-1&2
M41
King tiger
Jagdpanther
IJA Type 5 heavy 160ton (to be 3d printed)
FCM F1 (awaiting electronics)
Jagdpanzer E-100 (3D printing in progress)
- Will01Capri
- 2nd Lieutenant
- Posts: 2704
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
Re: Gig's 1:16 FCM F1
Very very good, keep going with it and get it finished. Very well done
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!