Yet another Sherman variant

This section is to 'show and tell' about any customizing or re-modeling you have done (or are doing) to a Heng Long tank.
Forum rules
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
Post Reply
Exhibitedbrute
Warrant Officer 2nd Class
Posts: 1303
Joined: Tue Dec 17, 2019 12:27 am

Yet another Sherman variant

Post by Exhibitedbrute »

This build is for the m4 105, it will become a Canadian support tank when I can find the markings

There are a few photos to accompany this, showing the printed parts and how I plan on the stowage to be.

Unfortunately the photos were taken in landscape therefore are sideways
Attachments
7776892C-E271-45D5-860B-E42D550BFDDE.jpeg
AAD0B47E-FC8D-4F7E-BD62-92E440F16770.jpeg
1D0C78A5-B2C8-4DD6-BF09-0F27DF72D78D.jpeg
1D0C78A5-B2C8-4DD6-BF09-0F27DF72D78D.jpeg (60.29 KiB) Viewed 1068 times
D9E8708E-14F0-421F-97F1-756D930EFC26.jpeg
D9E8708E-14F0-421F-97F1-756D930EFC26.jpeg (65.95 KiB) Viewed 1068 times
B3EDC226-C86A-442E-AAA1-B645F70BD989.jpeg
B3EDC226-C86A-442E-AAA1-B645F70BD989.jpeg (74.29 KiB) Viewed 1068 times
8ECFB954-BB0F-4978-B224-BB65F192799A.jpeg
8ECFB954-BB0F-4978-B224-BB65F192799A.jpeg (50.39 KiB) Viewed 1068 times
It’s your tank it’s what you make it
Exhibitedbrute
Warrant Officer 2nd Class
Posts: 1303
Joined: Tue Dec 17, 2019 12:27 am

Re: Yet another Sherman variant

Post by Exhibitedbrute »

Yet to be added are the engine doors metal suspension wheels and tracks
It’s your tank it’s what you make it
User avatar
Jimster
Lieutenant
Posts: 3046
Joined: Mon Dec 10, 2018 1:51 am
Location: Illinois

Re: Yet another Sherman variant

Post by Jimster »

Build threads like this inspire me to get a second tank. Looking good so far :thumbup:
User avatar
EAO
Warrant Officer 2nd Class
Posts: 1162
Joined: Sun May 10, 2020 5:29 pm
Location: Central Missouri, U.S. of A.

Re: Yet another Sherman variant

Post by EAO »

I thought I was the only one who used the wrong mode with my phone camera!?! :/ :{

EB, that is some very nice work! You guys have a knack for making things look sooo easy! :D

Cheers,
Eric.
"You can always tell a German, you just can't tell him much." Anonymous.

German cars, German girls, German beer, German firearms, German Shepherds, German motorcycles... Not necessarily in that order though!

UP THE IRONS!
Exhibitedbrute
Warrant Officer 2nd Class
Posts: 1303
Joined: Tue Dec 17, 2019 12:27 am

Re: Yet another Sherman variant

Post by Exhibitedbrute »

Nope I can’t work a camera either. Not done anything to it since I uploaded those photos of the 3D work other than prime the top half and though it’s yellow it looks much better. I will bung a photo up when I learn how to use the camera
It’s your tank it’s what you make it
Exhibitedbrute
Warrant Officer 2nd Class
Posts: 1303
Joined: Tue Dec 17, 2019 12:27 am

Re: Yet another Sherman variant

Post by Exhibitedbrute »

As I am now in the final stages of setting up my own printer I should soon be able to offer my 3D parts to the forum. I have engine decks for the a1 a4 a2 and as seen here m4, also I have the pepper pots and m4/m4a1 exhaust defuser, late small hatches, early direct vision hatches (fully functioning still in development. Extractor fans and fuel/water caps. Also in development are a2 exhausts and early bogies for m3, m4a1/a2

Some have these designs I have had for sometime but never been able to sell because forum rules dictate items must be designed and printed on your own printer and I just used to send the design to my dad to print on his.

So after this post I ask our team of moderators to check that the above is with in the rules before I put up any photos on an independent thread of my available parts and advise me on the decision
It’s your tank it’s what you make it
Post Reply

Return to “Heng Long Builds”