Sherman upgrading...

This section is to 'show and tell' about any customizing or re-modeling you have done (or are doing) to a Heng Long tank.
Forum rules
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14

Which speaker setup should I use... (See near bottom of OP)

Twin 5W speaker with an adjustable volume control?
1
17%
Single 15W speaker and jumper the volume control?
0
No votes
Single 15W speaker w/ an adjustable volume control?
5
83%
 
Total votes: 6

User avatar
Jarlath
Corporal
Posts: 401
Joined: Mon Jun 27, 2016 2:45 pm
Location: Ontario, Canada
Contact:

Re: Sherman upgrading...

Post by Jarlath »

OK. Finally got my soft silicone 18 AWG wire in to complete the power cables (Battery & Switch).
And of course I spent the last CAN-AM battleday doing surgery on the Sherman. Which is not unexpected, and was a nice change from the hustle and bustle & home.

Image
Speaker Cover installed. Volume control installed. Power jumper created and installed.


Image
Since this unit does not have a smoker, nor Flash LED/HID.


Image
The tightly restrained wiring for the fans and the power leads. Soldered the fan +ves together and then to the main power switch. -ves were spliced into the main negative cable.
Power switches on, fans turn. No receiver brown outs, etc...





Now to program the Clark board (Recoil direction, removal of track recoil, etc....) and ensure the upper turret is 100% too.
Post Reply

Return to “Heng Long Builds”