RAMSCHAUFELPANZER PANTHER

This section is to 'show and tell' about any customizing or re-modeling you have done (or are doing) to a Heng Long tank.
Forum rules
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
Post Reply
User avatar
HERMAN BIX
Brigadier
Posts: 10234
Joined: Sun Jan 12, 2014 12:15 am
Location: Gold Coast,Australia

RAMSCHAUFELPANZER PANTHER

Post by HERMAN BIX »

Evening folks, had an H/L panther G for ages just lurking on the project shelf.
Going to make it into an early 'D' turned into a bulldozer used in the rubble strewn streets of Nuremberg.
Its a rare beast indeed, not only a D, but the only ever photographed Panther version fitted with a bulldozer blade device.
Now there are two very good conversions from a G to an A in this section, and I am unashamedly going to use ideas from both to get this done.

For now, its hack & slash.............theres bits of 'G' & Pantiger flying in all directions ;)
Attachments
dozeroryg2.jpg
dozeroryg2.jpg (96.59 KiB) Viewed 5817 times
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
User avatar
BarryC
2nd Lieutenant
Posts: 2463
Joined: Sun Jan 03, 2016 11:43 am
Location: Savannah, GA. USA

Re: RAMSCHAUFELPANZER PANTHER

Post by BarryC »

Herman, this should be a very interesting build. :thumbup: No worries about barrel recoil either. ;)

Barry
"Details make perfection, and perfection is not a detail."
Leonardo Da Vinci
User avatar
STHV
Lance Corporal
Posts: 249
Joined: Thu May 17, 2018 9:47 pm
Location: Hertfordshire, UK

Re: RAMSCHAUFELPANZER PANTHER

Post by STHV »

Its an awful lot of work to backdate a G so good luck!

If you need any info or images of certain parts just ask, I practically have a library just on this one variant of the Panther lol
Panther Ausf D (WIP)
Panther Ausf A mit Brückentafel (WIP)
Panther Ausf G (WIP)
Jagdpanther G2 (WIP)
Tiger II (WIP)
Pz.Kpfw. VIII Maus V2 (WIP)
Pz.Kpfw. II Ausf L (WIP)
Sd.Kfz. 234/2 (WIP)
Leopard 1A4/1A1A1 (WIP)
Turm III (WIP)
VK 45.01 (H) (WIP)
User avatar
c.rainford73
Major
Posts: 6104
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Re: RAMSCHAUFELPANZER PANTHER

Post by c.rainford73 »

Herman this is another example of you bringing something unusual and exciting to the forum! I will watch your progress closely.

BTW is the blade simply fixed and welded on or is it articulated with cables and steel arms?


Good luck with this complex project

Carl
Tanks alot.... :wave:
User avatar
HERMAN BIX
Brigadier
Posts: 10234
Joined: Sun Jan 12, 2014 12:15 am
Location: Gold Coast,Australia

Re: RAMSCHAUFELPANZER PANTHER

Post by HERMAN BIX »

c.rainford73 wrote:Herman this is another example of you bringing something unusual and exciting to the forum! I will watch your progress closely.

BTW is the blade simply fixed and welded on or is it articulated with cables and steel arms?


Good luck with this complex project

Carl
Good morning Mr Rainford, yes it is a lot of work relative to the outcome of no gun tank !
But it’s just so odd that it’s worth doing just for that.
The blade is attached by I-beam arms , the top ones off the towing eye points, the lower off mounts from the transmission cover plates.
There is a large handwheel that is allegedly for adjusting the blade height that runs on Pz1 road wheels which I have a pair from a benefactor overseas.
I will make the blade from brass, and ballast the hull so it can really push without pulling a burnout .

I will admit to feeling rather committed when I sliced the side plates off the panther !!
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
User avatar
HERMAN BIX
Brigadier
Posts: 10234
Joined: Sun Jan 12, 2014 12:15 am
Location: Gold Coast,Australia

Re: RAMSCHAUFELPANZER PANTHER

Post by HERMAN BIX »

Still no pics sorry, using a spare computer while mine is at the cyber-doctors :problem:

The amount of green plastic I've sprayed around is insane !!
Resorted to an air die grinder with carbide bits to remove the bulk of the profiles before getting close with the ryobi tool. Still to get the sander out to fully level the surfaces.
Rear deck is clear of all 6 vents, crew heater, intake hood, front hull is clear of drivers ventilator, drivers periscope & hatch hinge , radio operators hatch hinge and MG ball.
Ive sliced the sponsons from the lower hull ready to build into the 'paniers' at the rear.
I need to get some styrene sheet for the hull sides,paniers, inner hull sides and to fill in the gaping wounds I've made on the hull & turret.
Turret is missing its cupola, all late G fixtures, and the mantlet has has such a close shave that ole mate might want to ":buy the company" .........for those old enough to remember those ads :/ .......the chin is gone, lots to do there to recover it.

There are bits of Mr Selkirks build and bits of Mr Esterniche's build, AND bits of Mr Jones' that Im using to pull this together.
All credit to them for blazing the trail ahead.
Long term, the real test is going to be the making of the blade frame and the load bearing wheels that help carry it.
Of course the wheels dont steer, so when the tank slews, there will be a lot of side load on the Pz1 wheels that will put side load on them and by that, the structure, so I'd better get things tough.

Pics as soon as I can either work out how to do it on this thing(different operating platform) or mine is back.
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
User avatar
HERMAN BIX
Brigadier
Posts: 10234
Joined: Sun Jan 12, 2014 12:15 am
Location: Gold Coast,Australia

Re: RAMSCHAUFELPANZER PANTHER

Post by HERMAN BIX »

STHV wrote:Its an awful lot of work to backdate a G so good luck!

If you need any info or images of certain parts just ask, I practically have a library just on this one variant of the Panther lol

Thanks for the offer Mr STHV, i would appreciate a rear engine deck birds eye view, and a turret roof view if you have them.
Any specific image of the driver and radio operators roof & escape hatch areas please.
The money shot will be a close up of the panier/sponsons on the rear hull that identify these versions for what they are.
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
User avatar
HERMAN BIX
Brigadier
Posts: 10234
Joined: Sun Jan 12, 2014 12:15 am
Location: Gold Coast,Australia

Re: RAMSCHAUFELPANZER PANTHER

Post by HERMAN BIX »

Oh, and a dimension'd drawing of the commanders drum style cupola if you feel like gifting me the lottery win !!
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
User avatar
STHV
Lance Corporal
Posts: 249
Joined: Thu May 17, 2018 9:47 pm
Location: Hertfordshire, UK

Re: RAMSCHAUFELPANZER PANTHER

Post by STHV »

I can do one better! The whole tank! Check your PM's
Panther Ausf D (WIP)
Panther Ausf A mit Brückentafel (WIP)
Panther Ausf G (WIP)
Jagdpanther G2 (WIP)
Tiger II (WIP)
Pz.Kpfw. VIII Maus V2 (WIP)
Pz.Kpfw. II Ausf L (WIP)
Sd.Kfz. 234/2 (WIP)
Leopard 1A4/1A1A1 (WIP)
Turm III (WIP)
VK 45.01 (H) (WIP)
User avatar
c.rainford73
Major
Posts: 6104
Joined: Thu Aug 25, 2016 7:34 pm
Location: Connecticut USA

Re: RAMSCHAUFELPANZER PANTHER

Post by c.rainford73 »

Wow Herman looks like you struck gold!
Tanks alot.... :wave:
Post Reply

Return to “Heng Long Builds”