Henglong 1/16 Panzer IV Aus G/H (Not a J!)
Forum rules
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
- Will01Capri
- 2nd Lieutenant
- Posts: 2704
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
Henglong 1/16 Panzer IV Aus G/H (Not a J!)
Hi Guys
I cannot take any credit for this tank as i have just bought it, but i am looking for info if anyone has any.
Henglong Panzer IV with alot of modifications, but i plan on some more details and upgrades.
Barrel recoil
• Dragon anti track recoil
• HL high intensity flash unit
• upgraded 5w speaker
• internal aerial
• metal tracks
• metal gearbox
• metal sprocket + idlers
• raised drive sprocket
• lowered 4th idle wheel
• correct hinges on front glacis hatches
• LED hull mg (not sure this working properly needs checking out)
• correct metal working headlight
• squared off guards around driver & machine gunners hatches
• correct 'C' type towing hooks
• spare wheel bin with 2 spare wheels
• extra spare track link holders on front/right side/rear of hull
• corrected barrel cleaning rods from 2 to 4 rods (because of longer
75mm gun)
• holes for turret lifting eye bolts
• turret stowage bin height corrected + bracket detail added
• removed turret & hull viewing ports as per ausf J
• corrected mantlet & changed muzzle brake to a double
• bullet ring added around base of cupola
• commanders hatch converted to one piece
• exhaust changed to twin stacks (ausf J)
• turret schurzen with fixing rivet detail metal
• shovel added to rear engine air intake
• extra armour plate effect added to front where drivers viewing port is
• reduced thickness of jacking block
• front track guards corrected to allow enough clearance for raised
sprockets
• gun aimers sight created on front of turret & rain drip guard added
Has been painted using Tamiya paints & Ableitung oils with Peddinghaus decals
New tank. Upgraded Panzer IV by Will Pattinson, on Flickr
New tank. Upgraded Panzer IV by Will Pattinson, on Flickr
New tank. Upgraded Panzer IV by Will Pattinson, on Flickr
New tank. Upgraded Panzer IV by Will Pattinson, on Flickr
New tank. Upgraded Panzer IV by Will Pattinson, on Flickr
New tank. Upgraded Panzer IV by Will Pattinson, on Flickr
New tank. Upgraded Panzer IV by Will Pattinson, on Flickr
Internals
Internals by Will Pattinson, on Flickr
EDIT:
Just found out, this is modelled around a G/H model, not J. Something to do with the rear upper track idelrs. Apparently they only ran 3 on the J, but 4 on the H.
Could it also be insignia for a Command Tank with K06?
I cannot take any credit for this tank as i have just bought it, but i am looking for info if anyone has any.
Henglong Panzer IV with alot of modifications, but i plan on some more details and upgrades.
Barrel recoil
• Dragon anti track recoil
• HL high intensity flash unit
• upgraded 5w speaker
• internal aerial
• metal tracks
• metal gearbox
• metal sprocket + idlers
• raised drive sprocket
• lowered 4th idle wheel
• correct hinges on front glacis hatches
• LED hull mg (not sure this working properly needs checking out)
• correct metal working headlight
• squared off guards around driver & machine gunners hatches
• correct 'C' type towing hooks
• spare wheel bin with 2 spare wheels
• extra spare track link holders on front/right side/rear of hull
• corrected barrel cleaning rods from 2 to 4 rods (because of longer
75mm gun)
• holes for turret lifting eye bolts
• turret stowage bin height corrected + bracket detail added
• removed turret & hull viewing ports as per ausf J
• corrected mantlet & changed muzzle brake to a double
• bullet ring added around base of cupola
• commanders hatch converted to one piece
• exhaust changed to twin stacks (ausf J)
• turret schurzen with fixing rivet detail metal
• shovel added to rear engine air intake
• extra armour plate effect added to front where drivers viewing port is
• reduced thickness of jacking block
• front track guards corrected to allow enough clearance for raised
sprockets
• gun aimers sight created on front of turret & rain drip guard added
Has been painted using Tamiya paints & Ableitung oils with Peddinghaus decals
New tank. Upgraded Panzer IV by Will Pattinson, on Flickr
New tank. Upgraded Panzer IV by Will Pattinson, on Flickr
New tank. Upgraded Panzer IV by Will Pattinson, on Flickr
New tank. Upgraded Panzer IV by Will Pattinson, on Flickr
New tank. Upgraded Panzer IV by Will Pattinson, on Flickr
New tank. Upgraded Panzer IV by Will Pattinson, on Flickr
New tank. Upgraded Panzer IV by Will Pattinson, on Flickr
Internals
Internals by Will Pattinson, on Flickr
EDIT:
Just found out, this is modelled around a G/H model, not J. Something to do with the rear upper track idelrs. Apparently they only ran 3 on the J, but 4 on the H.
Could it also be insignia for a Command Tank with K06?
Last edited by Will01Capri on Thu Sep 13, 2018 1:01 pm, edited 2 times in total.
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
- Will01Capri
- 2nd Lieutenant
- Posts: 2704
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
Re: Henglong 1/16 Panzer IV Aus J (looking for help!)
The smoker is standard and noisy. So i want to upgrade the smoker to be more silent and also more smoke.
The sound volume is not quite as loud as i would like! Is there anyway to make louder? Wondering if there are cheap mini amplifiers which could be spliced inline.
Wondering if i should convert to 2S lipo to replace the original nicad. Any ideas?
Other than that it seems to run well, but the range is limited with internal ariel on 27mhz. Is it worth putting an aeriel on it, which would look correct and then also help with the receiver getting a signal.
The sound volume is not quite as loud as i would like! Is there anyway to make louder? Wondering if there are cheap mini amplifiers which could be spliced inline.
Wondering if i should convert to 2S lipo to replace the original nicad. Any ideas?
Other than that it seems to run well, but the range is limited with internal ariel on 27mhz. Is it worth putting an aeriel on it, which would look correct and then also help with the receiver getting a signal.
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
- Will01Capri
- 2nd Lieutenant
- Posts: 2704
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
Re: Henglong 1/16 Panzer IV Aus J (looking for help!)
Quick video with tank running as it was bought
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
- jarndice
- Colonel
- Posts: 8018
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Henglong 1/16 Panzer IV Aus J (looking for help!)
Hi, If you are thinking of fitting an aerial on your PZ4 Aus J then you surely know that it was mounted on the Rear Left Flank.
http://www.hagen-miniatures.de
have a very nice mount for an aerial amongst other wonders on their site,
Well worth a visit.
I am halfway through a PZ4 Aus H and Hagens has been a valuable source for much of the updates.
http://www.hagen-miniatures.de
have a very nice mount for an aerial amongst other wonders on their site,
Well worth a visit.
I am halfway through a PZ4 Aus H and Hagens has been a valuable source for much of the updates.
I think I am about to upset someone
-
- Corporal
- Posts: 497
- Joined: Wed Oct 28, 2015 4:22 am
- Location: Southern Indiana
Re: Henglong 1/16 Panzer IV Aus J (looking for help!)
I've done this mod on several of my smokers. It really boosts the smoke output, and is pretty cheap, as well.
viewtopic.php?f=38&t=22406&hilit=smoker+fan
Bill
viewtopic.php?f=38&t=22406&hilit=smoker+fan
Bill
"Yeah, but it's a dry heat!"
Private Hudson (Bill Paxton) ALIENS
Private Hudson (Bill Paxton) ALIENS
- Will01Capri
- 2nd Lieutenant
- Posts: 2704
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
Re: Henglong 1/16 Panzer IV Aus J (looking for help!)
Thanks guys.
I have bought another new HL snoke unit and will modify the existing one. But i am thinking the J model Panzer IV had deployable smoke grenades.
However i cannot work out where they were situated as cannot find pictures of a J model to refer.
I am wondering if i can actually run twin smokes and have an extra channel to fire smoke for the grenades! but i will need to work a way to make thicker smoke than the exhausts, so maybe play with baby oil in the tank for that.
Definitely going to need lipo power now!
Anyone got any good links and recommendations for a 2s Lipo which runs well in these tanks?
I have bought another new HL snoke unit and will modify the existing one. But i am thinking the J model Panzer IV had deployable smoke grenades.
However i cannot work out where they were situated as cannot find pictures of a J model to refer.
I am wondering if i can actually run twin smokes and have an extra channel to fire smoke for the grenades! but i will need to work a way to make thicker smoke than the exhausts, so maybe play with baby oil in the tank for that.
Definitely going to need lipo power now!
Anyone got any good links and recommendations for a 2s Lipo which runs well in these tanks?
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
Re: Henglong 1/16 Panzer IV Aus J (looking for help!)
It doesn’t seem to drive like my full option Taigen Tiger 1, it’s not as proportional it seems.
Verzonden vanaf mijn iPhone met Tapatalk
Verzonden vanaf mijn iPhone met Tapatalk
- Will01Capri
- 2nd Lieutenant
- Posts: 2704
- Joined: Tue Jul 18, 2017 5:34 pm
- Location: South Scotland
Re: Henglong 1/16 Panzer IV Aus J (looking for help!)
Partly driver, but I think the motors could do with higher torque rating. Red can units maybe?Ghosttjr wrote:It doesn’t seem to drive like my full option Taigen Tiger 1, it’s not as proportional it seems.
Verzonden vanaf mijn iPhone met Tapatalk
HL camo E' Tiger
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
HL L' Tiger
M26 Pershing WW2 project
Tam K'Tiger project
HL Walker Bulldog project?
HL Panzer IV Munitionsschlepper für Karl-Gerät
HL Sherman project?
1/24 Leopard 2 Custom mod
2 many trucks to list!
Henglong 1/16 Panzer IV Aus J (looking for help!)
I can creep really really slow, much slower then in this video, https://youtu.be/OZk93Fjr4Fg
Verzonden vanaf mijn iPhone met Tapatalk
Verzonden vanaf mijn iPhone met Tapatalk
- jarndice
- Colonel
- Posts: 8018
- Joined: Mon Sep 03, 2012 11:27 am
- Location: the mountains of hertfordshire
Re: Henglong 1/16 Panzer IV Aus J (looking for help!)
They look like the original Pot Metal gearboxes so I would not expect too much from them,
I am in the process of changing a very old Heng Long PZ4 Aus F into an AuS H using a spare ASP 2 control board and it still has the same gearboxes as your PZ4,
It depends on the depths of my pocket whether I change them or not.
I am in the process of changing a very old Heng Long PZ4 Aus F into an AuS H using a spare ASP 2 control board and it still has the same gearboxes as your PZ4,
It depends on the depths of my pocket whether I change them or not.
I think I am about to upset someone