Pantiger to Panther A
Forum rules
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
-
wibblywobbly
- Major
- Posts: 6398
- Joined: Fri Oct 17, 2008 9:30 am
- Location: South Wales Valley
- Contact:
Re: Pantiger to Panther A
Top job, who ever would have believed that this was even possible!
Tiger 1 Late
Panther G
King Tiger
M36 B1
Panther G
King Tiger
M36 B1
-
Estnische
- Warrant Officer 2nd Class
- Posts: 1065
- Joined: Tue Jun 07, 2016 11:52 pm
- Location: Wollongong, Australia
Re: Pantiger to Panther A
The zim looks good - and ties everything together.
I love the extra width that the sloped sides give to the front of the A. More intimidating!
I love the extra width that the sloped sides give to the front of the A. More intimidating!
Re: Pantiger to Panther A
Thanks for the comments they’re very much appreciated,I think I will give the turret and upper hull a coat of rattle can yellow and strip down the hull. Metal suspension arms and upgrade springs to fit later but it needs some zimmerit and paint first.
Re.pantiger to panther
Tried to delete duplicate message but not so easy
Last edited by Aljones34 on Tue Mar 27, 2018 3:45 pm, edited 1 time in total.
Re: Pantiger to Panther A
Some more paint and spare track holders added. Need to get lower hull and road wheels sorted now but may get some weathering done too.
- Attachments
-
-
-
-
-
Re: Pantiger to Panther A
That Looks great
-
c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
-
Estnische
- Warrant Officer 2nd Class
- Posts: 1065
- Joined: Tue Jun 07, 2016 11:52 pm
- Location: Wollongong, Australia
Re: Pantiger to Panther A
Nice extras on the rear boxes too!
Re: Pantiger to Panther A
Estniche, the bin lids are from Shapeways in the US, they are a 3D printing consortium and have plenty of 1/16 tank parts in their online shop. Cost and postage was pretty good too.
Re: Pantiger to Panther A
Some weathering and damage added, I have put some blue tinted Perspex in some of the periscope positions with the remainder to do.
I have also started adding some Schrunzen plates along with a wire version of my own. Still more to do.
I have also started adding some Schrunzen plates along with a wire version of my own. Still more to do.
- Attachments
-
-
