M-3 Lee Kit
Forum rules
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: M-3 Lee Kit
Thanks Mr Painless. It was a very welcome distraction from the Holidays! Will be finishing the wiring today and hope to post some better photos and a video. The sponson 75mm is a real treat to see recoil and flash
Tanks alot....
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: M-3 Lee Kit
Here are some photos of some of the details and a short video of all the functions.
A few more finishing touches and it's about done.
As always thank you for looking
https://youtu.be/cKP_DrqEJbE
A few more finishing touches and it's about done.
As always thank you for looking
https://youtu.be/cKP_DrqEJbE
Tanks alot....
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
Re: M-3 Lee Kit
Hi carl and a happy new year, looks and sounds superb very well done indeed
regards john
regards john
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: M-3 Lee Kit
Thanks John. All the best in this new year my friend. Yes Stain has some really impressive stuff. It really brings this tank to lifeLudwig von wigbearer wrote:Hi carl and a happy new year, looks and sounds superb very well done indeed
regards john
Tanks alot....
Re: M-3 Lee Kit
Very nice, and very different to my Haya version (which just needs some transfers).
If you weren't aware the little hole centre-rear is to wind up the engine, and they tend to be chipped all around as getting the handles in isn't easy (the one on my Land Rover is a very dinged). And before anyone else comments, yes, it's a prototype clockwork tank.....
If you weren't aware the little hole centre-rear is to wind up the engine, and they tend to be chipped all around as getting the handles in isn't easy (the one on my Land Rover is a very dinged). And before anyone else comments, yes, it's a prototype clockwork tank.....
- SovereignZuul
- Corporal
- Posts: 452
- Joined: Sat Aug 25, 2012 11:50 pm
- Location: Connecticut, USA
Re: M-3 Lee Kit
Seem to be faring this ungodly cold better than me, my basement hobby area has been impossible to work in with our extreme CT weather!
The Lee is improving, liking the video a lot. I'll re-watch with sound after work today!
The Lee is improving, liking the video a lot. I'll re-watch with sound after work today!
My Build Thread: http://www.rctankwarfare.co.uk/forums/v ... 22&t=10204