Page 1 of 22
ABE'S EARLY TIGER 1 BUILD
Posted: Mon Feb 16, 2015 8:48 pm
by Abe Froman
Hi all,
Newbie to the site and RC Tanks but I saw a members dioramas on the RPF site and thought I had to get a Tiger 1. £60 ( what a bargain ) and a couple of days later and
Great size.
So with an OCD itch to make it "better" I set about carving ( and ordered tons of detail parts )
Its a start..
That's all for now. Thanks for looking in
D
Re: ABE'S EARLY TIGER 1 BUILD
Posted: Mon Feb 16, 2015 8:57 pm
by Merlin707
Looking good so far Abe
Re: ABE'S EARLY TIGER 1 BUILD
Posted: Mon Feb 16, 2015 9:02 pm
by wibblywobbly
Re: ABE'S EARLY TIGER 1 BUILD
Posted: Mon Feb 16, 2015 9:12 pm
by Abe Froman
Cheers Merlin
I do have a couple of questions though if anyone can assist:
1. What length should this bit of the barrel be when NOT in recoil?
And does anyone have dimensions to build the early filter ( red circle ). Will be building it by adapting the mid one.
Bye for now.
Re: ABE'S EARLY TIGER 1 BUILD
Posted: Mon Feb 16, 2015 9:41 pm
by Abe Froman
Wibbly, it already has taken a beating, have bought everything now:
Aber fenders ( side )
Aber AERIAL
Aber cupola int detail
Aber cleaning rods
Aber grills
Metal Tracks
Metal hatches,
Bah blah
etc etc
and on and on
Re: ABE'S EARLY TIGER 1 BUILD
Posted: Mon Feb 16, 2015 11:10 pm
by PainlessWolf
Good Afternoon, Abe,
Welcome to the Forum! You have made a bang up start here. Looking forward to more pictures of your work as you progress with the build.
regards,
Painless
Re: ABE'S EARLY TIGER 1 BUILD
Posted: Mon Feb 16, 2015 11:30 pm
by edpanzer
Yes as painless said a cracking start looking forward to the next installment.
Re: ABE'S EARLY TIGER 1 BUILD
Posted: Tue Feb 17, 2015 7:27 am
by AlwynTurner
Great start Abe, I'm looking for pointers as I want to smarten up my tiger but I'll have to see what I can build as my budget doesn't run to buying all those bits - still I love watching what others do and see what I feel competent enough to attempt. Will be following with great interest - lots of pics please.
Alwyn
Re: ABE'S EARLY TIGER 1 BUILD
Posted: Tue Feb 17, 2015 1:53 pm
by DavidByrden
View these images directly, the forum is shrinking them;
Re: ABE'S EARLY TIGER 1 BUILD
Posted: Tue Feb 17, 2015 3:56 pm
by Abe Froman
David, many thanks for the pic. These are obviously very thin metal and take a bit of a beating!!
Do we know how many Early Tiger 1 tanks were made? I have ordered the Haynes Manual which I believe is based on the Bovingdon Tiger, which I read somewhere is an early Tiger. Hoping it is a good book photo detail wise.
David..how did you become involved with the tank?