First HL Tiger 1 rebuild.
Forum rules
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
This section is for posting a build log of your Heng Long tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
Re: First HL Tiger 1 rebuild.
Hi all, just added the tools, fire extinguisher and grenade mesh. Almost forgot to mention the smoke dis chargers which i have added the wiring to after looking at images on line.
Alan
Alan
Re: First HL Tiger 1 rebuild.
Morning everyone, I have decided to add some spare tracks to the turret. I have also modelled the rear tow hook using the guide in the how to improve. One of the plastic tow cables has also been replaced with a metal one, the original clamps were drilled out and glued back in place. The cable wil be fitted in the ready for use position as shown in some photos.
I will have to extend the barrel soon I think.
Thanks Alan
I will have to extend the barrel soon I think.
Thanks Alan
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
Re: First HL Tiger 1 rebuild.
Lovely job, super details
regards john.
regards john.
Re: First HL Tiger 1 rebuild.
Very impressive.
JagdPanther / Leopard 2A6 / StuG Ausf. G / KV-2 / M4A3A4 / MTLB / 2.5 ton truck 6x6
Re: First HL Tiger 1 rebuild.
Hi everyone, I have now fitted the asiatam recoil unit with flash etc. Everything is working as it should apart from the barrels not returning fully forward. It stops about half way but will move forward after pushing left stick forward on transmitter. Anyone got any ideas?
- Raminator
- Warrant Officer 2nd Class
- Posts: 1267
- Joined: Tue Aug 11, 2015 9:57 am
- Location: Newcastle, Australia
Re: First HL Tiger 1 rebuild.
Is the ground wire (the long red one with the socket on it) connected to the negative terminal of the battery?
Re: First HL Tiger 1 rebuild.
Hi yep I spliced it into the negative side of the on/off switch.
-
- Staff Sergeant
- Posts: 769
- Joined: Sat Oct 29, 2016 8:57 pm
- Location: Retford Nottinghamshire
Re: First HL Tiger 1 rebuild.
Looks superb I hope mine turns out half as good
regards john
regards john
Re: First HL Tiger 1 rebuild.
John
Thanks for the comments on the tiger, asiatam recoil unit is now working great. It was more operator error than anything else. Track recoil has now been sorted using a mako 2017 and double relay.
Now to start converting a pantiger into a Panther Ausf A using inspiration and following Estnische great build.
Alan
Thanks for the comments on the tiger, asiatam recoil unit is now working great. It was more operator error than anything else. Track recoil has now been sorted using a mako 2017 and double relay.
Now to start converting a pantiger into a Panther Ausf A using inspiration and following Estnische great build.
Alan