Vintage King Tiger Rebuild
Forum rules
This section is for posting a build log of your Tamiya tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
This section is for posting a build log of your Tamiya tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
Vintage King Tiger Rebuild
Hello everyone, picked this early 80s clutch drive King Tiger at an estate sale a few days ago and have commenced stripping it down, cleaning it up and am going to attempt to update it with modern drive train and electronics. Here she is as I recieved her. Broken muzzle and some damage to the rear exhaust and rear plate, original esc looks to have caught fire at some point but its not staying anyways.
Sent from my SM-G965U using Tapatalk
Sent from my SM-G965U using Tapatalk
Re: Vintage King Tiger Rebuild
After some disassembly and clean up tonight. Now its time to do some research and source some parts. Unfortunately a lot of Tamiya factory parts are marked discontinued so getting ahold of a few things may be challenging.
Sent from my SM-G965U using Tapatalk
Sent from my SM-G965U using Tapatalk
Last edited by PNW Paul on Mon Jun 07, 2021 12:34 am, edited 1 time in total.
- PainlessWolf
- Lieutenant-Colonel
- Posts: 7407
- Joined: Sun Feb 26, 2012 9:09 pm
- Location: Southern Colorado Rocky Mountains
Re: Vintage King Tiger Rebuild
Good Evening,
I love seeing these old beasts refurbished and put back into service. There should be a few of the type here on the Forum for you to pore over and look for parts sources. The clutch drive alone on these tanks is a minor mechanical marvel.
regards and have fun!
Painless
I love seeing these old beasts refurbished and put back into service. There should be a few of the type here on the Forum for you to pore over and look for parts sources. The clutch drive alone on these tanks is a minor mechanical marvel.
regards and have fun!
Painless
...Here for the Dawn...
- 43rdRecceReg
- Major
- Posts: 6294
- Joined: Fri Jul 31, 2015 11:38 am
- Location: North West Highlands, Scotland
Re: Vintage King Tiger Rebuild
The suspension looks not to have changed much, if at all, since those early days. You can probably refit all the running gear without issue. Obtaining the gearboxes, however, is likely to be a problem (and expensive, in any event). It could be that the drive sprockets are slightly different. The existing rear track tensioner can be replaced with a Henntec unit, most likely. Alternate drive units could be fitted, as well as an alternate Controller system (MFU's are overpriced and not over here).
As Painless, suggests, it's worthwhile leafing through previous Tamiya KT rebuilds here.
Oddly enough, I rather like the neatly engineered 'analogue' clockwork look of Tamiya's early KT.
Enjoy the journey, whatever you opt for.
As Painless, suggests, it's worthwhile leafing through previous Tamiya KT rebuilds here.
Oddly enough, I rather like the neatly engineered 'analogue' clockwork look of Tamiya's early KT.
Enjoy the journey, whatever you opt for.
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
-
- Warrant Officer 1st Class
- Posts: 1665
- Joined: Tue Dec 25, 2018 11:28 pm
- Location: Centre France
Re: Vintage King Tiger Rebuild
Hello,
indeed, and for having done so, I confirm the price to come back to be high, without counting the concerns of adapting the current parts, for the turret, rotation, recoil, elevation, etc.
Link for info KT Porsche,vintage adaptation
http://www.rcgrabbag.com/tamiya-king-ti ... onversion/
indeed, and for having done so, I confirm the price to come back to be high, without counting the concerns of adapting the current parts, for the turret, rotation, recoil, elevation, etc.
Link for info KT Porsche,vintage adaptation
http://www.rcgrabbag.com/tamiya-king-ti ... onversion/
Re: Vintage King Tiger Rebuild
Thanks! That answered quite a few questions and ideas I had.Jofaur86 wrote:For info
https://www.tamiyaclub.com/forum/index. ... r-upgrade/
Sent from my SM-G965U using Tapatalk
Re: Vintage King Tiger Rebuild
congratulations you got a very nice piece, I keep my fingers crossed that he will succeed in his life
Re: Vintage King Tiger Rebuild
This kitty has some blemishes to fix up. Looks like something caught fire at one point and melted a hole in the upper hull, previous owner put random piece over the area.. Had to bust out the dremel and styrene. Not a finished product yet so dont be too harsh, lol. Now to fix the periscopes..
Sent from my SM-G965U using Tapatalk
Sent from my SM-G965U using Tapatalk