M4A3E8 - Up armoured

This section is for you to give a commentary / build log of your Tamiya tank. Remember - lots of pictures please!
Forum rules
This section is for posting a build log of your Tamiya tank.
Questions relating to issues you are having with your tank(s) should be posted in the General Questions forum here: viewforum.php?f=14
User avatar
Ad Lav
Captain
Posts: 4154
Joined: Tue Sep 01, 2009 4:44 pm
Location: Kent

M4A3E8 - Up armoured

Post by Ad Lav »

Next build I’ve been slowly plodding on with!

M4A3E8- up armoured version from 4th Armoured Divison.

Thunderbolt was the inspiration for this but I want to do a different one with no extra turret armour.

Got a second hand full option Tamiya Sherman and decided to pull it apart :)

Using photos and a modelling magazine for sizing etc I marked the shapes onto paper then transferred to plasticard. Cut to size and test fitted. So far so good.

Drilled and bolted the tranny armour, putty used in the screw heads to smooth off.

Side armour needed little notches cut for the fender holders.

Glacis front armour cut and trimmed to fit around the mg and all fittings marked from a spare hull I have.

Turret to be stolen from my cast hull as it’s a split hatch and correct for an up armoured Sherman’s, whereas the cast hull needs an oval loaders hatch. win win!

Schumo upgrade set installed.

Impact driveshaft bearing supports fitted.

Impact T66 tracks are on the way.
User avatar
Ad Lav
Captain
Posts: 4154
Joined: Tue Sep 01, 2009 4:44 pm
Location: Kent

Re: M4A3E8 - Up armoured

Post by Ad Lav »

Image

Image

Image


Sent from my iPhone using Tapatalk
User avatar
Ad Lav
Captain
Posts: 4154
Joined: Tue Sep 01, 2009 4:44 pm
Location: Kent

Re: M4A3E8 - Up armoured

Post by Ad Lav »

Image

Image




Sent from my iPhone using Tapatalk
User avatar
Harry Serpent
Private
Posts: 96
Joined: Thu Jun 14, 2018 3:30 pm

Re: M4A3E8 - Up armoured

Post by Harry Serpent »

Hi Adam, looking good. :thumbup:
The rear Dec lifting ring, and the engine cover resting block should be straight up, and not following the slope contours. :wave:
Harry Serpent Profesional Coffin Dodger.
User avatar
Ad Lav
Captain
Posts: 4154
Joined: Tue Sep 01, 2009 4:44 pm
Location: Kent

Re: M4A3E8 - Up armoured

Post by Ad Lav »

The lifting rings are the Schumo ones, they have angled bottom and are apparently correct angle?!

The engine door pegs I probably could straighten up ;D

Engine deck to change - being 3d printed by Woz.
User avatar
Ad Lav
Captain
Posts: 4154
Joined: Tue Sep 01, 2009 4:44 pm
Location: Kent

Re: M4A3E8 - Up armoured

Post by Ad Lav »

Harry - I’ll try and move them a bit straighter, Schumo have the angle set so a bit gutted they aren’t straight given the money they are...

Here’s some photos of them in war. Early T66 tracks, split hatch and various armour add ons.

Image

Image


Sent from my iPhone using Tapatalk
User avatar
43rdRecceReg
Major
Posts: 6295
Joined: Fri Jul 31, 2015 11:38 am
Location: North West Highlands, Scotland

Re: M4A3E8 - Up armoured

Post by 43rdRecceReg »

There are not many people bold enough to rip a Tamiya apart, Adam, but you're certainly one of them. 8O Even second-hand, or abused, Tamiyas generally command a significant price.. :thumbdown:
For his reason it's always interesting, and informative, to see you taking all the risks and, as with the Syrian Pz IV, the aged Tiger 1, and so on; but getting all the eye-popping results! :thumbup: Of course, you do it with new kits too!
You're a sort of resident Tamiya surgeon, and also our advance guard. ;)
Looking forward to an exemplary outcome...
Roy..
"Get your facts first, and then you can distort them as much as you please"- Mark Twain.
User avatar
Ad Lav
Captain
Posts: 4154
Joined: Tue Sep 01, 2009 4:44 pm
Location: Kent

Re: M4A3E8 - Up armoured

Post by Ad Lav »

Thank you for the kind words Roy!

I am slightly biased with Tamiya, but they’ve never given me reason the doubt the quality. I must stop buying Sherman’s though, this is my fifth :D
User avatar
Model Builder 4
2nd Lieutenant
Posts: 2329
Joined: Sun Jul 26, 2015 3:46 pm
Location: South Wales valleys
Contact:

Re: M4A3E8 - Up armoured

Post by Model Builder 4 »

Looks great Adam :thumbup: coming along nicely :D

Cheers, Lee.
Me ? Addicted ? Never !! :crazy:
User avatar
Ad Lav
Captain
Posts: 4154
Joined: Tue Sep 01, 2009 4:44 pm
Location: Kent

Re: M4A3E8 - Up armoured

Post by Ad Lav »

Thanks Lee :D
Post Reply

Return to “Tamiya Builds”