This is my URAL, all the electrics inside the command unit-which is very handy. Lighting unit in there as well as the battery.
I added a couple of figures for the cab, rear lights added and decals also, a all metal towing eye was added. I also meshed the grill, inside and added a cooling fan. The rear leaf-spring suspension on the rear was replaced with small shocks.
I also made a trailer from WPL parts after I knocked the US truck, that was in bits, on the floor and stood on it So, the back was okay as was the rails so cut down the rails, angled them added a small metal spring clip. Added the rear lights and took the wiring to a car waterproof connector placed in the middle of the a-frame, then a simple JST connector, with enough length so that it will move freely when turning.
Inside the truck back I took a lead from the lighting unit to a female JST connector that runs underneath, all works well. I originally used magleads to connect the trailer to the truck, thinking here was that if it did get snagged it would just pull away without damaging the wiring-it worked in principle but, the cables detached too easily on a turn-killing the trailer lights.
Anyway, I have waffled enough.
https://i.ibb.co/CvfxPqP/P1013698.jpg
https://i.ibb.co/2vq5Qz7/P1013695.jpg
https://i.ibb.co/C0czS86/P1013691.jpg
https://i.ibb.co/kDkx3q4/P1013689.jpg
These pics with the original maglead option.
https://i.ibb.co/ZT6N6SM/P1013673.jpg
https://i.ibb.co/QFtstNV/P1013674.jpg
https://i.ibb.co/Cnmdyz1/P1013672.jpg
Si
1/16 URAL AND TRAILER.
- Son of a gun-ner
- Lieutenant-Colonel
- Posts: 6865
- Joined: Sun May 07, 2017 8:49 pm
- Location: Surrey UK
Re: 1/16 URAL AND TRAILER.
Cool looking truck and trailer Si
I particularly like that the trailer doesn't have a matching paint scheme to the truck
I particularly like that the trailer doesn't have a matching paint scheme to the truck
Mick - The grit in the underpants of life!
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
And always happy to spare the bytes
TOTM needs YOU support YOUR TOTM competition, I'm doing my part, are YOU?
Re: 1/16 URAL AND TRAILER.
Thanks mate, appreciate it. The trailer was done in a pine green or forest green...or some kind of green, same colour I did the Gaz in, the trailer was supposed to go with that but, electrical components underneath the Gaz meant a good strong enough towing eye could not be fitted. Plus, I figure that a trailer can go with anything so will probably be a slightly different colour to the towing vehicle...well, that's my excuseSon of a gun-ner wrote:Cool looking truck and trailer Si
I particularly like that the trailer doesn't have a matching paint scheme to the truck
Thank you, got the truck from a member on a different forum and then reworked and added to it. I know what you mean about gathering dust...I have some kits that are the sameWardog wrote:Great build again,good work
My truck still in the box complete with dust.