Hi,Sub wrote:Hi.
Its because the servo is not centered correctly when at idle ie there is some load on the servo when the wheels are straight ahead and the servo is
It should now not make a noise until you apply load from the controller.
Tried this but it still makes noise "without any load". I can get rid of the noise when I turn the steering wheel on the transmitter and then let it free to quickly return to its central position. I need to do this exercise a couple of times and then the servo goes silent until I drive and steer.
I did center the servo using the transmitter as you described. The servo channel (No.1) is set to zero, no trimming is there. I guess it should center the servo alright. But the noise persists in most cases.
I also have the Ural 1/12 scale truck that came RTR. It does not make this noise in any conditions.