Page 157 of 160

Re: HL Truck Mods

Posted: Fri Aug 14, 2020 10:11 am
by Estnische
Its surprising - the trucks have been improving out of sight since this thread got started.

Give me a couple of weeks - something is in the mail.

Image

Re: HL Truck Mods

Posted: Fri Aug 14, 2020 11:50 am
by Will01Capri
Estnische wrote:Its surprising - the trucks have been improving out of sight since this thread got started.

Give me a couple of weeks - something is in the mail.

Image
They are all getting better and the internals improving all the time as WPL and the others are listening and making something that people want to use and abuse that doesn't rip the bottom out your pocket.
Its ingenious what these guys have done and i commend them.

The FY004 is a great truck, here is one i did recently with simple mods and a little paint.
Image
Image
Image

Re: HL Truck Mods

Posted: Fri Aug 14, 2020 12:45 pm
by jarndice
The FY004 is a very nice truck and a bit of a bargain for the price,
Paint the silencer with "Rust" and add a rear of cab fire extinguisher then fit the optional "Tilt" and an E-Bay sourced working "Tow Hook" and it starts to look quite good ,
A tip for the rear tilt flap,
To keep it closed just glue a small Neodymion magnet on the inside upper of the tailgate and it will attract the steel bar in the tilts flap.
After the nice words comes the Downside :thumbdown:
I wanted to remove and strip the cab so I could detail the interior and fit an upgraded all singing replacement WPL MFU with sound card and rear lights and a two speed gearbox,
Unfortunately the Factory has fitted an Airbrake air Tank holder on one side of the chassis and a drum fuel tank on the other side,
The screw heads holding these items to the chassis are inside the air tank holder and the fuel tank both of course being glued together,
Not a problem EXCEPT that they are covering two of the screw heads on the chassis holding the cab to the chassis Dohhh
I have a tube of Superglue debonder which might allow me to open up these two parts but I doubt it will be that easy. :thumbdown:

Re: HL Truck Mods

Posted: Fri Aug 14, 2020 3:50 pm
by Will01Capri
jarndice wrote:The FY004 is a very nice truck and a bit of a bargain for the price,
Paint the silencer with "Rust" and add a rear of cab fire extinguisher then fit the optional "Tilt" and an E-Bay sourced working "Tow Hook" and it starts to look quite good ,
A tip for the rear tilt flap,
To keep it closed just glue a small Neodymion magnet on the inside upper of the tailgate and it will attract the steel bar in the tilts flap.
After the nice words comes the Downside :thumbdown:
I wanted to remove and strip the cab so I could detail the interior and fit an upgraded all singing replacement WPL MFU with sound card and rear lights and a two speed gearbox,
Unfortunately the Factory has fitted an Airbrake air Tank holder on one side of the chassis and a drum fuel tank on the other side,
The screw heads holding these items to the chassis are inside the air tank holder and the fuel tank both of course being glued together,
Not a problem EXCEPT that they are covering two of the screw heads on the chassis holding the cab to the chassis Dohhh
I have a tube of Superglue debonder which might allow me to open up these two parts but I doubt it will be that easy. :thumbdown:
Shouldn't be glued. Our one just split with gentle persuasion

Re: HL Truck Mods

Posted: Fri Aug 14, 2020 3:52 pm
by jarndice
Thanks Will, I shall pop to the garage for a ball pane hammer :thumbup:

Re: HL Truck Mods

Posted: Fri Aug 14, 2020 4:16 pm
by jarndice
As ever Will quite right, Gentle persuasion did the job,
Just got to put the hammer back before I continue.
Thanks Will :haha: :thumbup:

Re: HL Truck Mods

Posted: Fri Aug 14, 2020 6:04 pm
by Exhibitedbrute
Does anyone print rubber tyres?

Re: HL Truck Mods

Posted: Fri Aug 14, 2020 6:06 pm
by Will01Capri
Exhibitedbrute wrote:Does anyone print rubber tyres?
Tend to be tpu printed tyres rather than rubber.
I know some who are great, but I don't do myself. I tend to go source tyres from around the world.
Whatbwidrh and diameter and treat type pattern you looking for

Re: HL Truck Mods

Posted: Fri Aug 14, 2020 6:09 pm
by Exhibitedbrute
Russian world war 2. I would have to measure the rims though. I have bought one of the metal dual drive wheel conversions for the 6x6 truck i will try find the listing if that’s any help

Re: HL Truck Mods

Posted: Sat Aug 15, 2020 10:21 am
by Exhibitedbrute
Nope after checking I will need wheels and tyres for a Russian lend lease truck if any one makes them