Taigen IR board

This forum relates to the Open Source Tank Control Board (TCB). Please read the sticky and visit the main site to find out all about the board and how to install it.
Post Reply
User avatar
leopardgreece
Corporal
Posts: 491
Joined: Tue Oct 27, 2015 1:48 pm

Taigen IR board

Post by leopardgreece »

Hello everybody, can anyone show me the Wiring diagram of this board IR but without use the 360° slip ring? Image

???????? ??? ?? SM-N950F ??? ??????????????? Tapatalk
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Taigen IR board

Post by Jofaur86 »

:D yes, think the attached photo should suffice :thumbup:
56C8D96B-1776-4030-8190-B651FC8D195E.jpeg
Disconnected connectors together (red circle) and connected directly to the plate, in the corresponding plugs
EACF15F0-20AC-4877-843F-B518B9934DE9.jpeg
EACF15F0-20AC-4877-843F-B518B9934DE9.jpeg (37.16 KiB) Viewed 1440 times
the black wire alone on the Asiatam recoil is a minus, and connects with the right black of the plate black wire alone on the Asiatam recoil is a minus, and connects with the right black of the plate
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Taigen IR board

Post by Jofaur86 »

:) Could this be easier to understand?
7FB07AB9-3885-48F2-858D-E3958F4B807E.jpeg
User avatar
leopardgreece
Corporal
Posts: 491
Joined: Tue Oct 27, 2015 1:48 pm

Re: Taigen IR board

Post by leopardgreece »

Ok i understand i just wonder if it will work with V2/3 board. I have noticed the V1 wiring diagram. Thank you very much

???????? ??? ?? SM-N950F ??? ??????????????? Tapatalk
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Taigen IR board

Post by Jofaur86 »

Bjr, no worries it will work, if you connect the cord of the IR mushroom on the plate in CN2 (IR Port)
you have to use this cord, the led goes in the hole that must exist on the manteler of the barrel, to check the operation, use your laptop in camera function, otherwise nothing visible.
https://www.rctank.de/Connection-system ... -HL-Taigen
Jofaur86
Warrant Officer 1st Class
Posts: 1663
Joined: Tue Dec 25, 2018 11:28 pm
Location: Centre France

Re: Taigen IR board

Post by Jofaur86 »

:) no worries, V1/2/3 works perfectly, provided you use an identical plate on the other tank :thumbup:
User avatar
leopardgreece
Corporal
Posts: 491
Joined: Tue Oct 27, 2015 1:48 pm

Re: Taigen IR board

Post by leopardgreece »

I will try. Thank you very much

???????? ??? ?? SM-N950F ??? ??????????????? Tapatalk
Post Reply

Return to “Open Panzer Tank Control Board”