How to build a working IR Artillery Gun

This forum relates to the Open Source Tank Control Board (TCB). Please read the sticky and visit the main site to find out all about the board and how to install it.
sateng
Recruit
Posts: 24
Joined: Sat Nov 04, 2017 12:32 pm

Re: How to build a working IR Artillery Gun

Post by sateng »

The battlesystem works very well!
I figured out that the flash only would work at first shot. It is the original taigen flash wired up as shown in your eagle drawing.
Any advice where I made a mistake?

Gesendet von meinem SM-G930F mit Tapatalk
sateng
Recruit
Posts: 24
Joined: Sat Nov 04, 2017 12:32 pm

Re: How to build a working IR Artillery Gun

Post by sateng »

Sorry forget about this post.
I swapped LOW and HIGH states for muzzle flash in Tank.cpp
It seems they use a different transistor in the flash Unit than it was programmed for.
sateng wrote:The battlesystem works very well!
I figured out that the flash only would work at first shot. It is the original taigen flash wired up as shown in your eagle drawing.
Any advice where I made a mistake?

Gesendet von meinem SM-G930F mit Tapatalk
Gesendet von meinem SM-G930F mit Tapatalk
Post Reply

Return to “Open Panzer Tank Control Board”