Same reason I hate 3D printed parts.Pavel wrote:And the most tedious process began for me - preparation for puttying ...
The surface sucks
Treated the surface with primer...
All the jambs of 3D printing came out like earthworms after the rain...
I made old-style armored shutters.
well now a pound of putty and a yard of sandpaper
That's why I don't really like 3D products.
BTR-152 3D printing 1/16
- tankme
- Warrant Officer 1st Class
- Posts: 1982
- Joined: Tue Oct 31, 2017 3:51 pm
- Location: Elgin, TX
- Contact:
Re: BTR-152 3D printing 1/16
Derek
Too many project builds to list...
Too many project builds to list...
Re: BTR-152 3D printing 1/16
My friend does not share my opinion, he uses a new generation machine, for a lot of money ....
Yes, the surface is much better, but I don't like "a little pregnant."
Yes, the surface is much better, but I don't like "a little pregnant."
Re: BTR-152 3D printing 1/16
Finished surface grinding...
My fingers are already sore from the monotonous reciprocating motions (don't get me wrong).
What you see is not winter camouflage .....
Now coating with a developing layer, identifying the remaining flaws, puttying and cleaning ...
My fingers are already sore from the monotonous reciprocating motions (don't get me wrong).
What you see is not winter camouflage .....
Now coating with a developing layer, identifying the remaining flaws, puttying and cleaning ...
- Captain Morgan
- Recruit
- Posts: 26
- Joined: Sun Apr 17, 2016 8:02 pm
- Location: Russia
Re: BTR-152 3D printing 1/16
Saw Shura, they are golden! (?)
Re: BTR-152 3D printing 1/16
I showed the sanded surface with a layer of paint, I will close up small cavities again and sand again ...
Re: BTR-152 3D printing 1/16
Four times I put putty on cavities that appeared out of nowhere, sanded ......
Then I could not stand it and redid the footrest ....
Yes, there must be holes in it - this is a stamped iron sheet.
Then I could not stand it and redid the footrest ....
Yes, there must be holes in it - this is a stamped iron sheet.
- Herr Dr. Professor
- Lieutenant
- Posts: 3616
- Joined: Mon Apr 22, 2019 10:48 pm
- Location: Southern Wisconsin USA
Re: BTR-152 3D printing 1/16
You are a patient person, and your work is showing its excellence. You also have a great sense of humor--even in translation from your first language.
- HERMAN BIX
- Brigadier
- Posts: 10311
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: BTR-152 3D printing 1/16
That last picture looked well weathered !!
Love your work & cant wait to see it finished
Love your work & cant wait to see it finished
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
Re: BTR-152 3D printing 1/16
Herman has a sense of humor....
Pre-painted so as not to spoil the eyes from this magical camouflage ....
It's not all that bad.....
Collected in order to see how it turns out in a first approximation ...
While I’m working on the headlights, then I’ll put a muzzle on them like for a dog, I’ll shove a red lantern from behind ....
Yes, the position of the tow hook is exactly this "on the stowed"
Still plenty of work...
For my grandson I built a fire boat with a water jet and a water cannon, and car a 90s Lamborghini from Uncle Liao,
The son played like that, now the grandson will.
Pre-painted so as not to spoil the eyes from this magical camouflage ....
It's not all that bad.....
Collected in order to see how it turns out in a first approximation ...
While I’m working on the headlights, then I’ll put a muzzle on them like for a dog, I’ll shove a red lantern from behind ....
Yes, the position of the tow hook is exactly this "on the stowed"
Still plenty of work...
For my grandson I built a fire boat with a water jet and a water cannon, and car a 90s Lamborghini from Uncle Liao,
The son played like that, now the grandson will.
- HERMAN BIX
- Brigadier
- Posts: 10311
- Joined: Sun Jan 12, 2014 12:15 am
- Location: Gold Coast,Australia
Re: BTR-152 3D printing 1/16
Magnificent
I will pm you my address and we can settle its final resting place eh
I reckon it would enjoy the Gold Coast lifestyle
I will pm you my address and we can settle its final resting place eh
I reckon it would enjoy the Gold Coast lifestyle
HL JAGDPANTHER,HL TIGER 1,HL PzIII MUNITIONSCHLEPPER, HL KT OCTOPUS,HL PANTHER ZU-FUSS,HL STuG III,HL T34/85 BEDSPRING,
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85
HL PZIV MALTA,MATORRO JAGDTIGER,HL F05 TIGER,TAMIYA KT,HL PANTHERDOZER,HL EARLY PANTHER G,TAIGEN/RAMINATOR T34/76,
HL AN-BRI-RAM SU-85