3D printable Jagdpanzer 38(t) Hetzer
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: 3D printable Jagdpanzer 38(t) Hetzer
I have,it seems like, been printing T35 tracks in 1/16 for ever & they only take 20 minutes each.
I feel your pain lol
Cheers
Wayne
Sent from my iPhone using Tapatalk
I feel your pain lol
Cheers
Wayne
Sent from my iPhone using Tapatalk
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: 3D printable Jagdpanzer 38(t) Hetzer
Any updates?
Cheers
Wayne
Sent from my iPhone using Tapatalk
Cheers
Wayne
Sent from my iPhone using Tapatalk
Re: 3D printable Jagdpanzer 38(t) Hetzer
Hi,
almost no
I was stucked in my full-time job and dont have too much will to make tracks after the work .
80% of the tracks are cleaned and ready for assembly.
I have a terrible problem with bearings.I need some MF72ZZ bearings and i have tried to order this on the Aliexpress 4 times from 4 vendors in 3 months but dont have any bearing .
I dont understand how is this possible.
almost no
I was stucked in my full-time job and dont have too much will to make tracks after the work .
80% of the tracks are cleaned and ready for assembly.
I have a terrible problem with bearings.I need some MF72ZZ bearings and i have tried to order this on the Aliexpress 4 times from 4 vendors in 3 months but dont have any bearing .
I dont understand how is this possible.
facebook.com/warprints
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: 3D printable Jagdpanzer 38(t) Hetzer
I’ve had a few issues with AliExpress recently, feels like their standards are dropping...
Cleaning tracks is my least favourite thing to do...
Cheers
Wayne
Sent from my iPhone using Tapatalk
Cleaning tracks is my least favourite thing to do...
Cheers
Wayne
Sent from my iPhone using Tapatalk
Re: 3D printable Jagdpanzer 38(t) Hetzer
yes.its dropping.i dont use aliexpress if i dont need to use it.i have a terrible experience with this bearings.i have tried to order mf72zz from 4 sellers, but i have no bearings for three months.what a shame.
now i understand that, mf72zz is very very hard to obtain and i have redesigned the road wheel for the mf62zz.i have found mf62zz a much more available.there is a lot of mf62 even on the ebay.its really widely available.this is what i need.it was my fault because i dont have maked a research.
ok.printed set of the wheels for the mf72zz can be used on the tankodrome (i have to make some thread with our tankodrome).i have to reprint all that road wheels.
mf62zz was ordered right now with a great estimated delivery - Jan 28 - Feb 06.
i love ebay...
i have cleaned 220 tracks links and cutted a 220 wires to connect this.
spare tracks on my builds are fully functionally, so i can use real spare tracks on the back of the Hetzer if i broke some tracks in action on meeting.
have to do some pictures.
i have just to assemble a half of the tracks today.easy final job.
and it seems to be a problem here.i have to order a Elmod but our local distributor have sold out and dont have answered my questions about availability of the board.so...i think i have a problem again.
now i understand that, mf72zz is very very hard to obtain and i have redesigned the road wheel for the mf62zz.i have found mf62zz a much more available.there is a lot of mf62 even on the ebay.its really widely available.this is what i need.it was my fault because i dont have maked a research.
ok.printed set of the wheels for the mf72zz can be used on the tankodrome (i have to make some thread with our tankodrome).i have to reprint all that road wheels.
mf62zz was ordered right now with a great estimated delivery - Jan 28 - Feb 06.
i love ebay...
i have cleaned 220 tracks links and cutted a 220 wires to connect this.
spare tracks on my builds are fully functionally, so i can use real spare tracks on the back of the Hetzer if i broke some tracks in action on meeting.
have to do some pictures.
i have just to assemble a half of the tracks today.easy final job.
and it seems to be a problem here.i have to order a Elmod but our local distributor have sold out and dont have answered my questions about availability of the board.so...i think i have a problem again.
facebook.com/warprints
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: 3D printable Jagdpanzer 38(t) Hetzer
Hi, do you have any further updates, I need my fix lol
Cheers
Wayne
Sent from my iPhone using Tapatalk
Cheers
Wayne
Sent from my iPhone using Tapatalk
- c.rainford73
- Major
- Posts: 6104
- Joined: Thu Aug 25, 2016 7:34 pm
- Location: Connecticut USA
Re: 3D printable Jagdpanzer 38(t) Hetzer
Thank you both for the interest.
I am a little bit frustrated, because of this bearings.I desperately need this 8 bearings for the road wheels.
As i am waiting, i have prepared Elmod and tested gun (sorry.i dont have a video ).Recoil is fast and gun movement is smooth.
I am pretty happy with this gun.
I am tracking this package with bearings everyday, seems to be possible to receive that before this weekend.
When i receive that f*n bearings, i can run that Hetzer within few hours.
I am a little bit frustrated, because of this bearings.I desperately need this 8 bearings for the road wheels.
As i am waiting, i have prepared Elmod and tested gun (sorry.i dont have a video ).Recoil is fast and gun movement is smooth.
I am pretty happy with this gun.
I am tracking this package with bearings everyday, seems to be possible to receive that before this weekend.
When i receive that f*n bearings, i can run that Hetzer within few hours.
facebook.com/warprints
- midlife306
- Warrant Officer 1st Class
- Posts: 2238
- Joined: Sun Aug 27, 2017 10:34 am
Re: 3D printable Jagdpanzer 38(t) Hetzer
I’ll keep my fingers crossed for you
Cheers
Wayne
Sent from my iPhone using Tapatalk
Cheers
Wayne
Sent from my iPhone using Tapatalk
Re: 3D printable Jagdpanzer 38(t) Hetzer
facebook.com/warprints