Upgrading a printer

All things 3D printing. Printers, design, CAD, hints and tips, models built.
nickmow
Lance Corporal
Posts: 215
Joined: Fri Dec 25, 2009 1:06 am
Location: Berkshire U.K

Re: Upgrading a printer

Post by nickmow »

Thanks all, I have done some tinkering and now the Z axis is more stable I’m getting markedly better results (less obvious layers). I was going to do the mod with threaded bats etc but ended up jamming it against the shelf above using some foam. So I’m happy now. I’m more about smaller items for the most part but maybe look at a CR10 when my ambitions get the better of me. Very much inspired by the work and ideas on here, thanks again
Post Reply

Return to “3D Printing”